DataSheetWiki


EMC5060-60HG20NRR fiches techniques PDF

Elite Semiconductor - Single-cell Li-Ion Charger IC

Numéro de référence EMC5060-60HG20NRR
Description Single-cell Li-Ion Charger IC
Fabricant Elite Semiconductor 
Logo Elite Semiconductor 





1 Page

No Preview Available !





EMC5060-60HG20NRR fiche technique
ESMT/EMP
EMC5060
Single-cell Li-Ion Charger IC with System
Power Management
General Description
The EMC5060 is a single-cell Li-ion charger IC with
system power management feature. It charges the
battery and power the system simultaneously. The
maximum charging current (up to 1.5A) is set by
external resistor for fast charging. The output voltage
for the system is regulated to a nominal value (three
different versions available: 4.4V, 5V or 6V); the
actual value of the output voltage depends on the
input voltage from the adapter, the charging
current and the system loading. With the decrease
of the input voltage or the increase of the system
loading current, the output voltage drops. When the
output voltage drops to a predetermined value
(VAPM-REG), the Active Power Management
function is activated and tries to maintain the output
voltage at VAPM-REG; the EMC5060 will suffice the
system loading with first priority and reduce the
charging current temporarily, i.e. under heavy load
condition, the EMC5060 charges the battery with
the remaining available current to keep the output
voltage at VAPM. In this manner, the charge and
discharge cycle of the battery can be reduced.
It is possible that the EMC5060 fails to maintain the
output voltage at VAPM-REG; for example, when the
system loading current exceeds the capability of the
current-limiting AC adapter. In this scenario, the
output voltage drops to the battery voltage, and
the system is allowed to draw current from the
battery.
Features
„ TQFN-20L Package
„ Active Power Management(APM) for
Simultaneously Powering the System and
Charging the Battery
„ Total Current Supported Up to 2 Amperes
( System Loading Having Higher Priority on the
Budget )
„ Automatic Power Source Selection (AC Adapter
or Battery)
„ 40mPower Path for the Battery to Supply the
System Power Efficiently
„ Junction Temperature Detection and Thermal
Regulation During Charging Process
„ External LED Indicating Charger and Power Good
Status as well as Fault Condition
„ Thermal, Short-Circuit, and Reverse Current
Protection
„ Short-Circuit Protection in the Low Power
Consumption Sleep Mode
„ SYSOFF Function to Cut Off the Path between the
System and the Battery
„ 6V (VOUT = 4.4V) Maximum Input Operating
Applications
„ Battery-Powered Devices or Equipment
„ Mobile Phones, Digital Cameras and MP3 Players
„ Radios, other Hand-Held Games and Instruments
„ Solar Power System
Elite Semiconductor Memory Technology Inc./Elite MicroPower Inc. Publication Date: Dec. 2011
Revision: 0.3
1/22

PagesPages 22
Télécharger [ EMC5060-60HG20NRR ]


Fiche technique recommandé

No Description détaillée Fabricant
EMC5060-60HG20NRR Single-cell Li-Ion Charger IC Elite Semiconductor
Elite Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche