|
|
PDF FP6163ADdR-G1 Data sheet ( Hoja de datos )
| Número de pieza | FP6163ADdR-G1 | |
| Descripción | 2A Synchronous Step-Down Regulator | |
| Fabricantes | Feeling Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FP6163ADdR-G1 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
FP6163
1.5MHz, 2A Synchronous Step-Down Regulator
General Description
The FP6163 is a high efficiency current mode synchronous buck PWM DC-DC regulator. The
internal generated 0.6V precision feedback reference voltage is designed for low output voltage. Low
RDS (ON) synchronous switch dramatically reduces conduction loss. To extend battery life for portable
application, 100% duty cycle is supported for low-dropout operation. Shutdown mode also helps saving
the current consumption. The FP6163 is packaged in MSOP-10L, DFN-10L and SOP-8L (EP) to
reduce PCB space.
Features
Input Voltage Range: 2.5 to 5.5V
Adjustable Output Voltage From 0.6V to VIN
Precision Feedback Reference Voltage: 0.6V (±2%)
Output Current: 2A (Max.)
Duty Cycle: 0~100%
Internal Fixed PWM Frequency: 1.5MHz
Low Quiescent Current: 100μA
No Schottky Diode Required
Built-in Soft Start
Current Mode Operation
Over Temperature Protection
Package: MSOP-10L (EP), DFN-10L, SOP-8L (EP)
Applications
Cellular Telephone
Wireless and DSL Modems
Digital Still Cameras
Portable Products
MP3 Players
Typical Application Circuit
This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice.
No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product.
Website: http://www.feeling-tech.com.tw
Rev. 2.2
1/19
1 page  
FP6163
Ordering Information
Part Number Operating Temperature
FP6163ADgR-G1
-40°C ~ +85°C
FP6163ADdR-G1
-40°C ~ +85°C
FP6163ADXR-G1
-40°C ~ +85°C
Package
MSOP-10L (EP)
DFN-10L
SOP-8L (EP)
MOQ
3000EA
2500EA
2500EA
Description
Tape & Reel
Tape & Reel
Tape & Reel
Absolute Maximum Ratings
Parameter
Input Supply Voltage
EN, VFB, SW Voltage
P-Channel Switch Source Current (DC)
N-Channel Switch Source Current (DC)
Peak SW Switch Sink and Source Current (AC)
Thermal Resistance (Junction to Ambient)
Thermal Resistance (Junction to Case)
Junction Temperature
Storage Temperature
Lead Temperature (soldering, 10 sec)
Symbol Conditions
VIN
Min.
-0.3
-0.3
MSOP-10L (EP)
θJA DFN-10L
SOP-8L (EP)
MSOP-10L (EP)
θJC DFN-10L
SOP-8L (EP)
-65
Typ.
Max.
6
VIN
2.6
2.6
4.3
+70
+65
+50
+10
+10
+10
+150
+150
+260
Unit
V
V
A
A
A
°C / W
°C / W
°C / W
°C / W
°C / W
°C / W
°C
°C
°C
Suggested IR Re-flow Soldering Curve
This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice.
No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product.
Website: http://www.feeling-tech.com.tw
Rev. 2.2
5/19
5 Page 
Inductor Value (µH)
2.2
2.2
3.3
3.3
4.7
4.7
Dimensions (mm)
8.3×8.3×4.5
10.3×10.3×4.0
8.3×8.3×4.5
10.3×10.3×4.0
8.3×8.3×4.5
10.3×10.3×4.0
FP6163
Component Supplier
FENG-JUI
FENG-JUI
FENG-JUI
FENG-JUI
FENG-JUI
FENG-JUI
Model
TPRH8D43-2R2M
TPRH10D40-2R2M
TPRH8D43-3R3M
TPRH10D40-3R3M
TPRH8D43-4R7M
TPRH10D40-4R7M
Output Capacitor Selection
The output capacitor is required to maintain the DC output voltage. Low ESR capacitors are
preferred to keep the output voltage ripple low. In a buck converter circuit, output ripple voltage is
determined by inductor value, switching frequency, output capacitor value and ESR. The output ripple
is determined by:
VO
IL
ESRCOUT
8f
1
COUT
Where f = operating frequency, COUT= output capacitance and ΔIL = ripple current in the inductor.
For a fixed output voltage, the output ripple is highest at maximum input voltage since ΔIL increases
with input voltage.
Capacitor Value
10μF
10μF
22μF
Case Size
0805
0805
0805 1206
Component Supplier
Taiyo Yuden
TDK
TDK
Model
JMK212BJ106MG
C12012X5ROJ106K
C2012JB0J226M
Using Ceramic Input and Output Capacitors
Care must be taken when ceramic capacitors are used at the input and the output. When a
ceramic capacitor is used at the input and the power is supplied by a wall adapter through long wires, a
load step at the output can induce ringing at the input, VIN. At best, this ringing can couple to the output
and be mistaken as loop instability. At worst, a sudden inrush current through the long wires can
potentially cause a voltage spike at VIN, which may large enough to damage the part. When choosing
the input and output ceramic capacitors, choose the X5R or X7R specification. Their dielectrics have
the best temperature and voltage characteristics of all the ceramics for a given value and size.
Output Voltage Programming
In the adjustable version, the output voltage is set using a resistive voltage divider from the output
voltage to FB. The output voltage is:
VO
0.6V1
R1
R2
This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice.
No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product.
Website: http://www.feeling-tech.com.tw
Rev. 2.2
11/19
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet FP6163ADdR-G1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FP6163ADdR-G1 | 2A Synchronous Step-Down Regulator | Feeling Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |