|
|
PDF OPB940 Data sheet ( Hoja de datos )
| Número de pieza | OPB940 | |
| Descripción | Photologic Slotted Optical Switches | |
| Fabricantes | OPTEK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPB940 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
Features:
• Choice of aperture size
• Choice of output configurations
• Choice of opaque or IR transmissive shell
• Choice of pins (L) or wires (W)
• 0.125” (3.18 mm) slot width
• 0.320” (8.128 mm) lead spacing for PCBoard (side mounting)
• Data rates to 250 kBaud
L Package
W Package
Description:
The OPB930 and OPB940 series of Photologic® photo integrated circuit switches provide optimum flexibility for
the design engineer. Building from a standard housing with a 0.125” (3.18 mm) wide slot, a user can specify the
type and polarity of TTL output, discrete shell material, aperture width and either 0.350” (8.9 mm) long pins
(L Series) or 24” (610 mm) AWG, UL listed wire leads (W Series).
All housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity
to both visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device
throat) are either IR transmissive plastic (for applications where aperture contamination may occur) or opaque
plastic (for maximum protection against ambient light).
Electrical output can be specified as either TTL Totem Pole or TTL Open Collector, either of which can be supplied
with buffer or inverter output polarity. All devices have the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Mechanical switch replacement
• Speed indication (tachometer)
• Mechanical limit indication
Part Number Guide — OPB930 and OPB940 Series
OPB 9 X X X X X Z———————For “W” series only
Optek Assembly
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Photologic® Photo Integrated
Circuit Sensor Family
Emitter Aperture:
5 — 0.050” (12.70 mm)
Discrete Shell Material:
3 — Side mount IR transmissive
Plastic discrete shell
4 — Side mount opaque
Plastic discrete shell
Electrical Specification Variations:
0 = Buffered Totem-Pole Output
1 = Buffered Open-Collector Output
2 = Inverted Totem-Pole Output
3 = Inverted Open-Collector Output
Mounting configurations:
L — Solder leads termination
W — Wire termination
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND
Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing
structural failure in OPTEK’s molded plastics.
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 02/08
Page 1 of 7
1 page  
Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
OPB930_11, OPB940_11 - Flag Next to Emitter
1.20
OPB930_11, OPB940_11 - Flag Next to Sensor
1.20
1.00
0.80
0.60
0.40
0.20
Right to Left (back)
Top to Bottom
Bottom to Top
Left to Right
Right to Left
Left to Right (back)
1.00
Right to Left (back)
Right to Left
0.80
Top to Bottom
0.60 Bottom to Top
Left to Right
0.40
Left to Right (back)
0.20
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.00
0.25 0.00
OPB930_11, OPB940_11 - Flag in Middle of Slot
1.20
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
1.00
Right to Left
Right to Left (back)
0.80
Top to Bottom
Bottom to Top
0.60
Left to Right
0.40
Left to Right (back)
0.20
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
0 Top to Bottom
Left to Right
Emitter
Right to Left
Sensor
0 Width
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 02/08
Page 5 of 7
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet OPB940.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPB940 | Photologic Slotted Optical Switches | OPTEK |
| OPB940L | (OPB930L / OPB940L) Photologic Slotted Optical Switches | OPTEK |
| OPB940W | (OPB930W / OPB940W) Photologic Slotted Optical Switches | OPTEK |
| OPB947 | (OPB947 / OPB948) PHOTOLOGIC SLOTTED SWITCHES |  ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |