|
|
PDF HDH-01730CID Data sheet ( Hoja de datos )
| Número de pieza | HDH-01730CID | |
| Descripción | Couplers with Connectors (H Type) | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HDH-01730CID (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Couplers with Connectors (H Type)
HDH Series
HDH-00803GHD
HDH-01503GH
HDH-01503GHD
HDH-03003GHD
HDH-06003GHD
HDH-09003GHD
HDH-12803CHD
sFeatures
1.High Performance
The high frequency characteristics feature
extremely low loss, a high degree of matching, and
high isolation.
2.Power Uniform Distribution and
90˚Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90˚phase difference between the two outputs (or
two inputs).
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
4.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
50 ohms
2 to 50 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Contact resistance 4 m ohms max.
2.Insulation resistance 1000 M ohms min.
Standard
3.Vibration
4.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
5.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
1A
100 V DC
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 980 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature : -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time : 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part Material
Connector Body
Stainless steel
Connector female contacts Beryllium copper
Connector Insulator
PTFE
Case
Aluminum
Board
Dielectric
Finish
Passivated
Gold plating
---------
---------
Gold plating
16
1 page  
Couplers with Connectors (I Type)
HDH Series
HDH-00810GID
HDH-02249AI
HDH-01510GID
HDH-03020GID
sFeatures
1.High Performance
The high frequency characteristics feature.
Extremely high degree of matching, and high
isolation.
2.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
3.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
4.Full Coupling Variations
Full variations of coupling over 6 dB are available.
HDH-06020GID
HDH-09010GID
HDH-12806CID
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
50 ohms
4 to 50 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Contact resistance 4 m ohms max.
2.Insulation resistance 1000 M ohms Max.
Standard
3.Vibration
4.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
5.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
1A
100 V DC
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 980 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature : -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time : 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part Material
Connector Body
Stainless steel
Connector female contacts Beryllium copper
Connector Insulator
PTFE
Case
Aluminum
Board
Dielectric
Finish
Passivated
Gold plating
---------
---------
Gold plating
20
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HDH-01730CID.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HDH-01730CID | Couplers with Connectors (H Type) | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |