DataSheetWiki


HD74ALVCH16831 fiches techniques PDF

Hitachi Semiconductor - 1-to 4 Address Register / Driver with 3-state Outputs

Numéro de référence HD74ALVCH16831
Description 1-to 4 Address Register / Driver with 3-state Outputs
Fabricant Hitachi Semiconductor 
Logo Hitachi Semiconductor 





1 Page

No Preview Available !





HD74ALVCH16831 fiche technique
HD74ALVCH16831
1-to 4 Address Register / Driver with 3-state Outputs
ADE-205-194 (Z)
Preliminary
1st. Edition
March 1998
Description
This 1-bit to 4-bit address register / driver is designed for 2.3 V to 3.6 V VCC operation. The device is ideal
for use in applications in which a single address bus is driving four separate memory locations. The
HD74ALVCH16831 can be used as a buffer or a register, depending on the logic level of the select (SEL)
input. When SEL is logic high, the device is in the buffer mode. The outputs follow the inputs and are
controlled by the two output enable (OE) controls. Each OE controls two groups of nine outputs. When
SEL is logic low, the device is in the register mode. The register is an edge triggered D-type flip flop. On
the positive transition of the clock (CLK) input, data set up at the A inputs is stored in the internal registers.
OE controls operate the same as in buffer mode. When OE is logic low, the outputs are in a normal logic
state (high or low logic level). When OE is logic high, the outputs are in the high impedance state. To
ensure the high impedance state during power up or power down, OE should be tied to VCC through a
pullup registor; the minimum value of the registor is determined by the current sinking capability of the
driver. SEL and OE do not affect the internal operation of the flip flops. Old data can be retained or new
data can be entered while the outputs are in the high impedance state. Active bus hold circuitry is provided
to hold unused or floating data inputs at a valid logic level.
Features
VCC = 2.3 V to 3.6 V
Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
High output current ±24 mA (@VCC = 3.0 V)
Bus hold on data inputs eliminates the need for external pullup / pulldown resistors

PagesPages 12
Télécharger [ HD74ALVCH16831 ]


Fiche technique recommandé

No Description détaillée Fabricant
HD74ALVCH16830 1-bit to 2-bit Address Driver with 3-state Outputs Hitachi Semiconductor
Hitachi Semiconductor
HD74ALVCH16831 1-to 4 Address Register / Driver with 3-state Outputs Hitachi Semiconductor
Hitachi Semiconductor
HD74ALVCH16835 18-bit Universal Bus Driver with 3-state Outputs Hitachi Semiconductor
Hitachi Semiconductor
HD74ALVCH16836 20-bit Universal Bus Driver with 3-state Outputs Hitachi Semiconductor
Hitachi Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche