|
|
PDF HX92B Data sheet ( Hoja de datos )
| Número de pieza | HX92B | |
| Descripción | Temperature and Humidity Sensors | |
| Fabricantes | Omega | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HX92B (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects
in materials and workmanship for a period of 13 months from
date of purchase. OMEGA’s WARRANTY adds an additional one (1)
month grace period to the normal one (1) year product warranty
to cover handling and shipping time. This ensures that OMEGA’s
customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for
evaluation. OMEGA’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be
defective, it will be repaired or replaced at no charge. OMEGA’s
WARRANTY does not apply to defects resulting from any action of
the purchaser, including but not limited to mishandling, improper
interfacing, operation outside of design limits, improper repair,
or unauthorized modification. This WARRANTY is VOID if the unit
shows evidence of having been tampered with or shows evidence of
having been damaged as a result of excessive corrosion; or current,
heat, moisture or vibration; improper specification; misapplication;
misuse or other operating conditions outside of OMEGA’s control.
Components in which wear is not warranted, include but are not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for
any omissions or errors nor assumes liability for any damages
that result from the use if its products in accordance with
information provided by OMEGA, either verbal or written.
OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA
MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF
ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING
ANY WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set forth
herein are exclusive, and the total liability of OMEGA with
respect to this order, whether based on contract, warranty,
negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon
which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used,
nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC),
used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or
with any nuclear installation or activity, medical application, used on
humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and,
additionally, purchaser will indemnify OMEGA and hold OMEGA
harmless from any liability or damage whatsoever arising out of the use
of the Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA
Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.
FOR WARRANTY RETURNS,
please have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number under
which the product was
PURCHASED,
2. Model and serial number of
the product under warranty, and
3. Repair instructions and/or
specific problems relative to
the product.
FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair
charges. Have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number to
cover the COST of the repair or
calibration,
2. Model and serial number of the
product, and
3. Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes,
whenever an improvement is possible. This affords our customers
the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2014 OMEGA ENGINEERING, INC. All rights reserved.
This document may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable
form, in whole or in part, without the prior written consent of OMEGA
ENGINEERING, INC.
MQS5339/0514
ARTWORK/PRODUCT ART/
DWGS/START HERE ARROW
5
Replace Sensor Probe
The Sensor probe can be replaced quickly for the wall
mount and remote models.
The models with a replaceable sensor probe:
HX92BC, HX92BV0, HX92BV1, HX92BV2, HX92BC- RP1,
HX92BV0-RP1, HX92BV1-RP1, HX92BV2-RP1.
The models without a replaceable sensor probe:
HX92BC- D, HX92BV0-D, HX92BV1-D,
HX92BV2-D.
Procedure to replace the Sensor probe:
a. Loosen the securing nut and pull the sensor probe out.
b. Insert the new sensor probe to the M12 connector, and
then tighten the securing nut to secure the connection.
SECURING NUT
REPLACEABLE
SENSOR PROBE
Figure 6. Sensor Probe Replacement
If your HX92B will be used in a dusty environment, the
protective sensor filter (if clogged) may be removed for
cleaning.
Unscrew the protective cover and gently blow
compressed air through the filter screen. A soft brush
may also be used to remove dirt particles from the
screen.
ARTWORK/PRODUCT ART/
DWGS/START HERE ARROW
6
If the sensor is subjected to 100% condensation, it must
be dried to obtain correct readings. There will be no
permanent damage or calibration shift to the unit.
Units should not be exposed to high concentrations of
ammonia or alcohol vapors.
NOTE:
For the Duct Mount model Transmitter, it must be sent
back to factory for sensor probe replacement and
recalibration.
Calibration:
Your transmitter has been digitally calibrated and
tested in our factory to meet or exceed the specifications
outlined in this manual. The transmitter must be sent
back to the factory for any re-calibration request.
Specifications:
Measuring Range:
Accuracy Range:
Hysteresis:
Repeatability:
Resolution:
Response Time:
Sample Rate:
Operating
Temperature:
Input Power
4-20mA:
0-1V:
0-5V:
0-10V:
Max Loop
Resistance:
Max. Load
(min. resistance)
Resistance:
Sensor Type:
0 to 100%
±2.5% for 20 to 80%
±3.5% for 5 to 20%
±3.5% for 80 to 95%
±4% for 0 to 5%
±4% for 95 to 100%
±1%
±0.1%
0.1%
8 Seconds typical
1 Sample every 4 second
-30 to 75°C (-22 to 167°F)
9 to 30 Vdc @ 50mV
9 to 30 Vdc @ 50mA
9 to 30 Vdc @ 50mA
12 to 30 Vdc @ 50mA
200 Ohms @ 9 Vdc supply voltage.
1,300 Ohm @ 30 Vdc supply.
Ohms = ((V supply – 4 V)/0.02 A)
1.25K for outputs: 0 -1 Vdc, 0 – 5
Vdc. 2.40K for 0 -10 Vdc output
Digital Sensor
For complete product manual:
www.omega.com/manuals/manualpdf/M5339.pdf
HX92B
Relative Humidity Transmitters
®
omega.com [email protected]
U.S.A.:
Servicing North America:
OMEGA Engineering, Inc., One Omega Dr.
P.O. Box 4047, Stamford, CT 06905-0047 USA
Toll-Free: 1-800-826-6342 (USA & Canada Only)
Customer Service: 1-800-622-2378 (USA & Canada Only)
Engineering Service: 1-800-872-9436 (USA & Canada Only)
Tel: (203) 359-1660
Fax: (203) 359-7700
e-mail: [email protected]
For Other Locations Visit omega.com/worldwide
The information contained in this document is believed to be correct, but
OMEGA accepts no liability for any errors it contains, and reserves the right to
alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used
for, human applications.
http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet HX92B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HX92B | Temperature and Humidity Sensors | Omega |
| HX92B | Relative Humidity Transmitters Manual | Omega |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |