DataSheetWiki


ADM708 fiches techniques PDF

Analog Devices - Low Cost Microprocessor Supervisory Circuits

Numéro de référence ADM708
Description Low Cost Microprocessor Supervisory Circuits
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADM708 fiche technique
Low Cost Microprocessor
Supervisory Circuits
ADM705/ADM706/ADM707/ADM708
FEATURES
Guaranteed RESET valid with VCC = 1 V
190 μA quiescent current
Precision supply voltage monitor
4.65 V (ADM705/ADM707)
4.40 V (ADM706/ADM708)
200 ms reset pulse width
Debounced TTL/CMOS manual reset input (MR)
Independent watchdog timer (ADM705/ADM706)
1.60 sec timeout (ADM705/ADM706)
Active high reset output (ADM707/ADM708)
Voltage monitor for power-fail or low battery warning
Superior upgrade for MAX705 to MAX708
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Critical microprocessor supply monitoring
GENERAL DESCRIPTION
The ADM705/ADM706/ADM707/ADM708 microprocessor
supervisory circuits are suitable for monitoring 5 V power
supplies/batteries and can also monitor microprocessor activity.
The ADM705/ADM706 provide power-supply monitoring
circuitry that generate a reset output during power-up, power-
down, and brownout conditions. The reset output remains
operational with VCC as low as 1 V. Independent watchdog
monitoring circuitry is also provided. Thisis activated if the
watchdog input has not been toggled within 1.60seconds.
In addition, there is a 1.25 V threshold detector to warn of
power-failures, to detect low battery conditions, or to monitor an
additional power supply. An active low, debounced manual reset
input (MR) is also included.
FUNCTIONAL BLOCK DIAGRAMS
WATCHDOG
INPUT (WDI)
WATCHDOG
TRANSITION
DETECTOR
WATCHDOG
TIMER
WATCHDOG
OUTPUT (WDO)
VCC
MR
VCC
POWER-FAIL
INPUT (PFI)
250μA
4.65V*
1.25V
RESET AND
WATCHDOG
TIMEBASE
RESET
GENERATOR
ADM705/
ADM706
RESET
POWER-FAIL
OUTPUT (PFO)
*VOLTAGE REFERENCE = 4.65V (ADM705), 4.40V (ADM706)
Figure 1. ADM705/ADM706
MR
VCC
POWER-FAIL
INPUT (PFI)
VCC
250μA
4.65V*
1.25V
RESET
GENERATOR
ADM707/
ADM708
RESET
RESET
POWER-FAIL
OUTPUT (PFO)
* VOLTAGE REFERENCE = 4.65V (ADM707), 4.40V (ADM708)
Figure 2. ADM707/ADM708
The ADM705 and ADM706 are identical except for the reset
threshold monitor levels, which are 4.65 V and 4.40 V, respectively.
The ADM707 and ADM708 provide a similar functionality to
the ADM705 and ADM706 and only differ in that a watchdog
timer function is not available. Instead, an active high reset
output (RESET) is available as well as the active low reset output
(RESET). The ADM707 and ADM708 are identical except for
the reset threshold monitor levels, which are 4.65 V and 4.40 V,
respectively.
All parts are available in narrow 8-lead PDIP and 8-lead SOIC
packages.
Rev. G
Information furnished by Analog D evices isbelieved to beaccurate and reliable. However, n o
responsibility isassumed byAnalogDevices for its use,nor for any infringementsofpatentsorother
rights ofthirdpartiesthat may result fromitsuse. Specifications subject to change without notice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksaretheproperty oftheir respective owners.
One T echnology Way, P .O. B ox 91 06, Nor wood, MA 020 62-9106, U. S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2008 Analog Devices, Inc. All rights reserved.
http://www.Datasheet4U.com

PagesPages 12
Télécharger [ ADM708 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADM7001 Single Ethernet 10/100M PHY ADMtek
ADMtek
ADM7008 Octal Ethernet 10/100M PHY ADMtek
ADMtek
ADM705 Low Cost uP Supervisory Circuits Analog Devices
Analog Devices
ADM706 Low Cost uP Supervisory Circuits Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche