|
|
PDF GP1UX31QS Data sheet ( Hoja de datos )
| Número de pieza | GP1UX31QS | |
| Descripción | Holder-less Type IR Detecting Unit | |
| Fabricantes | Sharp Electrionic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP1UX31QS (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
GP1UX31QS Series
GP1UX31QS Series
Holder-less Type IR Detecting Unit
for Remote Control
Features
1. Holder-less shield case type.
2. Compact type.
3. Strengthened resistance to electromagnetic
induction noise by double mold method.
4. Operarting voltage 3V type.
Outline Dimens ions
5.5
(Unit : mm)
Conductive resin(GND)
2.1 3.2
Applications
1. AV equipments
2. Home appliances
3. Toys using IR sensor
1.6
1.2
Absolute Maximum Ratings
(Ta=25
Parameter
Symbol
Rating
Unit
Supply voltage
VCC 0 to +6.0
*1 Operating temperature Topr
-10 to +70
Storage temperature Tstg -20 to +70
*2 Soldering temperature Tsol
265
*1 No dew condensation is allowed
*2 For 6s (At mounting on PCB with thickness of 1.6mm)
V
Recommended Operating Conditions
Parameter
Supply voltage
Symbol Operating conditions
VCC 2.7 to 5.5
Unit
V
0.5
*1 2.54
*1 2.54
Vcc
GND
V out
0.4
Example of mounting drawing
from solder side (Reference)
Top of lenz
1. *1 : Indicates root dimensions of connector.
2. Unspecified tolerance: 0.3
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1 Sheet No.: OP06013
http://www.Datasheet4U.com
1 page  
GP1UX31QS Series
9. There is a possibility that noise on output may be caused by environmental condition (Disturbing light noise, Electromagnetic
noise, Power supply line noise, etc.) even if there is no input transmission signal.
10. Please shall confirm operation or your actual machine. Because the output pulse width of this product is fluctuated by
environmental conditions such as signal format, temperature, distance from transmitter, and so on.
11. In case that this product is kept in high humidity condition, it may be hard to solder, please be careful enough about storage
method.
Depend on the flux you select, there are different solderabilities, so please select a suitable flux and use it.
12. This product dose`t correspond to soldering by reflow.
13. Please make sure in case pf hand soldering that yue the solder iron with less than 45W power and solder iron point(edge)
temperature is less than 320 within 3 seconds,and also don't add any force to lead frame directly.And please make sure never
to touch 2nd mold resin by a solding.
14. When using this device,please be careful not to cause dew drop.
Be aware that the dew drop rusts lead pins portion and others, may affect the electric characteristics.
15. The lead flame may be deformed since the device is packed in vinyl bag.
Sheet No.: OP06013
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet GP1UX31QS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP1UX31QS | Holder-less Type IR Detecting Unit | Sharp Electrionic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |