|
|
PDF NLHW01S02 Data sheet ( Hoja de datos )
| Número de pieza | NLHW01S02 | |
| Descripción | NICHIA LUMINOUS FLUX WHITE STANDARD LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NLHW01S02 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Nichia STS-DA1-0571
<Cat.No.081105>
SPECIFICATIONS FOR NICHIA LUMINOUS FLUX WHITE STANDARD LED
MODEL : NLHW01S02
NICHIA CORPORATION
http://www.Datasheet4U.com
1 page  
Nichia STS-DA1-0571
<Cat.No.081105>
(3) Safety Guideline for Human Eyes
· The International Electrical Commission (IEC) published in 2006 IEC 62471:2006 Photobiological
safety of lamps and lamp systems which includes LEDs within its scope. Meanwhile LEDs were
removed from the scope of the IEC 60825-1:2007 laser safety standard, the 2001 edition of which
included LED sources within its scope. However, keep in mind that some countries and regions have
adopted standards based on the IEC laser safety standard IEC 60825-1:2001 which includes LEDs
within its scope.
Following IEC 62471:2006, most of Nichia LEDs can be classified as belonging to either Exempt
Group or Risk Group 1. Optical characteristics of a LED such as output power, spectrum and light
distribution are factors that affect the risk group determination of the LED. Especially a high-power
LED, that emits light containing blue wavelengths, may be in Risk Group 2.
Great care should be taken when viewing directly the LED driven at high current or the LED with
optical instruments, which may greatly increase the hazard to your eyes.
(4) Others
· Flashing lights have been known to cause discomfort in people; you can prevent this by taking
precautions during use. Also, people should be cautious when using equipment that has had LEDs
incorporated into it.
· This product is designed to be used for calibration. Do not use this product for any other purposes or
other applications.
· User shall not reverse engineer by disassembling or analysis of the LEDs without having prior written
consent from Nichia. When defective LEDs are found, the User shall inform Nichia directly before
disassem bling or analysis.
· The formal specifications must be exchanged and signed by both parties before purchase.
· The appearance and specifications of the product may be modified for improvement without notice.
-4-
5 Page 
Connector Number
②①⑧
③⑨⑦
④⑤⑥
(Figure seen from direction of arrow of figure below)
Protection
device
Anode
LED
Cathode
Peltier device
Platium RTD
-10-
1. LED Anode for curre nt s upply
6. LED Anode for me as ure voltage
8. Pe ltie r de vice
9. Pe ltie r de vice
3. Platinum te mpe rature s e ns or (3 wire type )
4. Platinum te mpe rature s e ns or (3 wire type )
5. Platinum te mpe rature s e ns or (3 wire type )
7. LED Cathode for me asure vol tage
2. LED C athode for curre nt s upply
NLHx01S02 STS-DA5-0011
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet NLHW01S02.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NLHW01S02 | NICHIA LUMINOUS FLUX WHITE STANDARD LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |