DataSheetWiki


FSP150-AHA fiches techniques PDF

Fortron - 150 WATT SWITCHING POWER SUPPLIES

Numéro de référence FSP150-AHA
Description 150 WATT SWITCHING POWER SUPPLIES
Fabricant Fortron 
Logo Fortron 





1 Page

No Preview Available !





FSP150-AHA fiche technique
UNIVERSAL INPUT
FEATURES
Wide range input 90 to 260VAC
Standby consumption < 1W
Low safety ground leakage current
Low ripple and noise
Fast transient response
Overcurrent, Short-circuit, Overvoltage, and Thermal protections
100% burn-in at full rated load
Meets EN55022, FCC Class B, VCC, EN61000 Class A,D
Compliant with RoHS requirements
DESCRIPTION
This series of switching power supplies are specially designed for portable
applications. They are capable of delivering up to 150 watts of continuous
DC output power. Construction is a 94V-1 rated polyphenylene-oxide
case with an IEC 320/C14 inlet to mate with interchangeable cord for
world-wide use. All models meet CISPR 22 and FCC class B emission
limits and comply with UL, CSA, IEC and CE requirements.
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
Input Current
Inrush Current
(at 25cold start)
Leakage Current
(Touch current)
90 to 260 VAC
47 to 63 Hz
2A rms @ 115VAC
1A rms @ 230VAC
No damage @ 115VAC or 230VAC
150µA max @ 115VAC 60Hz
250µA max @ 230VAC 50Hz
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Operating Humidity
0 °C to +40 °C.
–20 °C to +80 °C
10% to 95% RH, non-condensing
FSP150 SERIES
150 WATT
SWITCHING POWER
SUPPLIES
GENERAL SPECIFICATIONS
Construction
Connectors / Terminals
Efficiency
Turn on delay time
Power Factor
Dielectric Isolation
MTBF
(per MIL-HDBK-217F)
94V-1 rated polyphenylene-oxide case
IEC 320/C14 inlet. Options for DC Out.
88% min , at 110 VAC or 240 VAC
5 Sec max
0.95 typical
3000VAC from input to output
1500VAC from input to ground
100,000 hours minimum at full load
at 25 °C ambient
OUTPUT SPECIFICATIONS
Total Output Power
Output Voltage / Current,
Adjustability, Peak Current
Minimum Load
Hold Up Time
Line Regulation
Ripple and Noise
Overvoltage Protection
Overcurrent / Short Circuit
Protection
Transient Response
Refer to Rating Chart for each model
Refer to Rating Chart for each model
No minimum load required
3 mSec min @ 100 VAC
±0.5% max at full load
350mV peak to peak max
Setting at 110-140% of Vnom output
voltage
Continuous protection with automatic
recovery
Maximum excursion of 4% or better on
all models, recovering to 1% of final
value within 500 uS after a 25% step load
change.
EMC and SAFETY (1)
EMC Performance Standard EN60601-1-2: 2001
EN61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11
EN55022, FCC-15, VCCI
Class-B Conducted, Radiated
Safety Standards
(certified to)
UL60950-1 3rd, CSA C22.2 No 60950-1
3rd, EN60950: 2000 (Nemko)
(1) Products are rated for commercial environments and are not to be used
nor are warranted in aerospace or life-support medical applications.
23181 Antonio Parkway, Rancho Santa Margarita CA 92688 U.S.A. Telephone 949-766-9240 Fax: (949) 766-9241
E-mail: [email protected] Website: www.fspgroup.com
Rev C 12/2008
http://www.Datasheet4U.com

PagesPages 2
Télécharger [ FSP150-AHA ]


Fiche technique recommandé

No Description détaillée Fabricant
FSP150-AHA 150 WATT SWITCHING POWER SUPPLIES Fortron
Fortron

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche