DataSheet.es    


PDF EM5103 Data sheet ( Hoja de datos )

Número de pieza EM5103
Descripción 3A Low Dropout LDO
Fabricantes CYStech Electronics 
Logotipo CYStech Electronics Logotipo



Hay una vista previa y un enlace de descarga de EM5103 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! EM5103 Hoja de datos, Descripción, Manual

CYStech Electronics Corp.
3A Low Dropout LDO
EM5103
Spec. No. : C554QP
Issued Date : 2010.11.17
Revised Date :
Page No. : 1/12
General Description
EM5103 is a 3A low dropout linear regulator designed for low dropout and high current applications. This device
works with dual supplies, a control input for the control circuitry and a power input as low as 1.2V for providing
current to output.
It features 3A output current and ultra-low-drop output voltage as well as full protection functions.
VOUT can be as low as 0.8V.
Features
VIN Range 1.2V to 5.5V
VOUT is Adjustable (0.8V Min)
Excellent Line Regulation
Excellent Load Regulation
3A Guaranteed Output Current*
*Check thermal design information.
300mV @ 3A Dropout Voltage
OTP and OCP Functions
Very Low On-Resistance
Enable & Power good Signal
Applications
Notebook & Netbook
Graphic Cards & MB
Low Voltage Logic Supplies
Chipset Supplies
Server System
SMPS Post Regulators
Ordering Information
Part Number
EM5103QP
EM5103NA
Package
PSOP-8
(Pb-free lead plating package)
DFN3×3-10L
(Pb-free lead plating package)
Pin Configuration
PSOP-8
EM5103
DFN3×3-10L
CYStek Product Specification
http://www.Datasheet4U.com

1 page




EM5103 pdf
Parameter
Thermal Protection
Thermal Shutdown
Temperature
Thermal Shutdown
Hysteresis
CYStech Electronics Corp.
Spec. No. : C554QP
Issued Date : 2010.11.17
Revised Date :
Page No. : 5/12
Symbol
Test Conditions
Min Typ Max Units
TSD
TSDHYS
VIN=VCNTL=VEN=5V, IOUT=0A,
VOUT=VREF
VIN=VCNTL=VEN=5V, IOUT=0A,
VOUT=VREF
- 160
- 30
- °C
- °C
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. θJA is measured in the natural convection at TA=25°C on a 4-layers high effective thermal conductivity test board with
minimum copper area of JEDEC 51-7 thermal measurement standard. The case point of θJC is on the expose pad for
PSOP-8 package.
Note 3. θJA is 52°C/W for PSOP-8 packages on JEDEC 51-7 (4 layers,2S2P) thermal test board with 50mm² copper area.
Note 4. Devices are ESD sensitive. Handling precaution is recommended.
Note 5. The device is not guaranteed to function outside its operating conditions.
Note 6. Load regulation is measured by a current pulse with 50Hz frequency and 10% duty cycle.
Note 7. The dropout voltage is defined as (VIN-VOUT), which is measured when VOUT equal to (VOUT,(NORMAL)-100mV).
EM5103
CYStek Product Specification

5 Page





EM5103 arduino
CYStech Electronics Corp.
PSOP-8 Dimension
Spec. No. : C554QP
Issued Date : 2010.11.17
Revised Date :
Page No. : 11/12
Marking:
Device Name
Date Code
8-Lead PSOP-8 Plastic
Surface Mounted Package
CYStek Package Code: QP
DIM
Inches
Min. Max.
A 0.1850 0.2008
B 0.1457 0.1614
C 0.2283 0.2441
D 0.0130 0.0200
E 0.05*
F 0.0472 0.0638
G 0.0032 0.0110
Millimeters
Min. Max.
4.70 5.10
3.70 4.10
5.80 6.20
0.33 0.51
1.27 *
1.20 1.62
0.08 0.28
DIM
Inches
Min. Max.
H 0.0157 0.0327
I 0.0075 0.0102
J 0.0098 0.0197
K 0°
8°
M 0.0764 0.0980
N 0.0764 0.0980
*:Typical
Millimeters
Min. Max.
0.40 0.83
0.19 0.26
0.25 0.50
0° 8°
1.94 2.49
1.94 2.49
Notes : 1.Controlling dimension : millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material :
Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0
EM5103
CYStek Product Specification

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet EM5103.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EM5102Low Dropout LDOExcelliance MOS
Excelliance MOS
EM5102AQP2A Low Dropout LDOCYStech Electronics
CYStech Electronics
EM5103Low Dropout LDOExcelliance MOS
Excelliance MOS
EM51033A Low Dropout LDOCYStech Electronics
CYStech Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar