DataSheetWiki


NCV7383 fiches techniques PDF

ON Semiconducto - Bus Driver

Numéro de référence NCV7383
Description Bus Driver
Fabricant ON Semiconducto 
Logo ON Semiconducto 





1 Page

No Preview Available !





NCV7383 fiche technique
NCV7383
FlexRay] Bus Driver
NCV7383 is a single channel FlexRay bus driver compliant with
the FlexRay Electrical Physical Layer Specification Rev . 3.0.1,
capable of communicating at speeds of up to 10 Mbit/s. It provides
differential transmit and receive capability between a wired FlexRay
communication medium on one side and a protocol controller and
a host on the other side.
NCV7383 mode control functionality is optimized for nodes
without the need of extended power management provided by
transceivers with permanent connection to the car battery as is on
NCV7381. NCV7383 is primarily intended for nodes switched off by
ignition.
It of fers excellent Electromagnetic compatibility (EMC) and
Electrostatic discharge (ESD) performance.
KEY FEATURES
General
Compliant with FlexRay Electrical Physical Layer Specification Rev 3.0.1
FlexRay Transmitter and Receiver in NormalPower Modes for
Communication up to 10 Mbit/s
Support of 60 ns Bit Time
FlexRay LowPower Mode Receiver for Remote Wakeup Detection
Excellent Electromagnetic Susceptibility (EMS) Level Over Full
Frequency Range. Very Low Electromagnetic Emissions (EME)
Bus Pins Protected Against >10 kV System ESD Pulses
Safe Behavior Under Missing Supply or No Supply Conditions
Interface Pins for a Protocol Controller and a Host (TxD, RxD,
TxEN, STBN, BGE, ERRN, CSN, SCK, SDO)
Supply Pins VCC, VIO with Independent Voltage Ramp Up:
VCC Supply Parametrical Range from 4.75 V to 5.25 V
VIO Supply Parametrical Range from 2.3 V to 5.25 V
TxEN Timeout and BGE Feedback
Two Error Indication Modes
Track mode Error Signaling on ERRN Pin
Latched mode Status Register accessible via SPI
Compatible with 14 V and 28 V Systems
Operating Ambient Temperature 40°C to +125°C (TAMB_Class1)
Junction Temperature Monitoring
TSSOP14 Package
These are PbFree Devices
FlexRay Functional Classes
Bus Driver Bus Guardian Interface
Bus Driver Logic Level Adaptation
Bus Driver Remote Wakeup
Quality
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AECQ100
Qualified and PPAP Capable
http://onsemi.com
14
1
TSSOP14
CASE 948G
MARKING
DIAGRAM
14
NV73
830
ALYWG
1
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = PbFree Package
VIO
TxD
TxEN
RxD
BGE
STBN
SCK
PIN CONNECTIONS
1
(Top View)
VCC
BP
BM
GND
ERRN
CSN
SDO
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 20 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
September, 2013 Rev. 0
1
Publication Order Number:
NCV7383/D
http://www.Datasheet4U.com

PagesPages 21
Télécharger [ NCV7383 ]


Fiche technique recommandé

No Description détaillée Fabricant
NCV7380 LIN Transceiver ON Semiconductor
ON Semiconductor
NCV7381 FlexRay Bus Driver ON Semiconductor
ON Semiconductor
NCV7382 Enhanced LIN Transceiver ON Semiconductor
ON Semiconductor
NCV7383 Bus Driver ON Semiconducto
ON Semiconducto

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche