DataSheetWiki


SMM201-24-3.3 fiches techniques PDF

Conversion Devices - Medical Single or Dual Output

Numéro de référence SMM201-24-3.3
Description Medical Single or Dual Output
Fabricant Conversion Devices 
Logo Conversion Devices 





1 Page

No Preview Available !





SMM201-24-3.3 fiche technique
ADVANCED DATA
Medical Single or Dual Output
3.0" W x 5.0" L x 1.38" H
EAGLE SERIES Model SMM201
Total Output Power
150/200 watt
Output Channels
Single or Dual
Input Mains Voltage
90-264VAC
FEATURES
200 watt single or dual output ZVS power supply
High Efficiency 90% typical
Open PCB construction
Output voltages:
V1 Hi-current Main output available with any voltage
from 12 to 60 V up to 16.7A current rating
V2 Auxiliary output available with any voltage
from 3.3 to 12.0 V rated up to 5.0A maximum
150 watt convection rating
Hi-density Compact footprint of 3.0”W x 5.0”L x 1.38”H
UL2601, IEC601 and CSA22.2 No. 601 pending
Low leakage current less than 300 µA @ hi-line 264 VAC
Dual AC fusing on both lines
ENVIRONMENTAL
Operating temperature: 0°C to 50°C derate output po wer at
2.5% per degree from 50°to 70°C.
Storage temperature: -40°C to 85°C
Temperature coefficient: ± 0.03% per °C
Cooling - Convection cooled (150 W) and 200 W with 15 lfm of
directed airflow
Humidity: Operating; non-condensing 5% to 95%
Shock and Vibration: 2G on 3 axis
GENERAL SPECIFICATIONS
Input
Input voltage ………………...Universal input 90 to 264 VAC
Power Factor ………………..0.95
Frequency ............................47-63 Hz
Input current………………….2.2A @ 115 VAC
1.2A @ 230 VAC
Inrush current .......................35A @ 115 VAC max., cold start
@ 25°C 70A @ 230 VAC
Efficiency ..............................90% typical at full load, nom. line
EMI filter ...............................FCC Class “B”, CISPR 22 Class “B”
and EN55022 Class B.
Earth leakage current ..……..less than 135 µA @ 132 VAC input.
Less than 270µA @ 264 VAC input. Lower leakage models
optional. Contact factory for option code
Isolation voltage:
Input to output …...4200 VAC
Input to chassis ….1500 VAC
Output
Output voltage …………….…See Table
Output voltage trim ………….±1 V typical
Maximum power .................. 200 watts
Minimum Load ……………….No minimum load required
Start-up delay ………………..2 s max.
Start-up rise time …………....2 ms
Hold-up time..........................>12 ms @ 150 W load, 115 VAC
nominal line at factory voltage setting.
Line Regulation ………….…..1% max., 0.5% typical
Load Regulation ………..…...3% max., 1% typical
Transient Response ………...4% max. deviation, 500 µs recovery
time for a 50% load change
Ripple & Noise ……………....1% pk-to-pk expressed as a
percentage of output voltage. Measured at 20MHz bandwidth.
Physical
Size ………………...…………3.0” W x 1.38” H x 5.0” L
(75.6 mm x 35 mm x 127 mm)
Weight …………….………….0.80 lbs. (0.363 kg.)
Construction.………...……….Open style PCB with 4 mounting holes
15481 Electronic Lane • Huntington Beach, CA 92649 • (714) 898-6551 • Fax: (714) 894-9248
e-mail: [email protected] • www.cdipower.com
http://www.Datasheet4U.com

PagesPages 2
Télécharger [ SMM201-24-3.3 ]


Fiche technique recommandé

No Description détaillée Fabricant
SMM201-24-3.3 Medical Single or Dual Output Conversion Devices
Conversion Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche