DataSheetWiki


ADP2380 fiches techniques PDF

Analog Devices - 4 A Synchronous Step-Down Regulator

Numéro de référence ADP2380
Description 4 A Synchronous Step-Down Regulator
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP2380 fiche technique
Data Sheet
20 V, 4 A Synchronous Step-Down
Regulator with Low-Side Driver
ADP2380
FEATURES
Input voltage: 4.5 V to 20 V
Integrated 44 mΩ high-side MOSFET
0.6 V ± 1% reference voltage over temperature
Continuous output current: 4 A
Programmable switching frequency: 250 kHz to 1.4 MHz
Synchronizes to external clock: 250 kHz to 1.4 MHz
180° out-of-phase synchronization
Programmable UVLO
Power-good output
External compensation
Internal soft start with external adjustable option
Startup into a precharged output
Supported by ADIsimPower design tool
APPLICATIONS
Communications infrastructure
Networking and servers
Industrial and instrumentation
Healthcare and medical
Intermediate power rail conversion
DC-to-dc point of load application
GENERAL DESCRIPTION
The ADP2380 is a current mode control, synchronous, step-down,
dc-to-dc regulator. It integrates a 44 mΩ high-side power MOSFET
and a low-side driver to provide a high efficiency solution. The
ADP2380 runs from an input voltage of 4.5 V to 20 V and can
deliver 4 A of output current. The output voltage can be adjusted
to 0.6 V to 90% of the input voltage. The switching frequency of
the ADP2380 can be programmed from 250 kHz to 1.4 MHz or
fixed at 290 kHz or 540 kHz. The synchronization function allows
the switching frequency to be synchronized to an external clock
to minimize system noise.
TYPICAL APPLICATIONS CIRCUIT
VIN
CIN
1 PVIN
2 PVIN
BST
SW
16
15
CBST
L
3 14
UVLO ADP2380 SW
4 PGOOD
LD 13
FET
5 RT
ROSC 6
SYNC
VREG 12 CVREG
PGND 11
7 EN/SS
GND 10
CSS
8
COMP
9
FB
CC_EA
RC_EA
VOUT
COUT
RTOP
RBOT
CCP_EA
Figure 1.
100
95
90
85
80
75
70
65
60 VOUT = 1.2V
55
VOUT = 3.3V
VOUT = 5V
50
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
OUTPUT CURRENT (A)
Figure 2. Efficiency vs. Output Current, VIN = 12 V, fSW = 250 kHz
External compensation and an adjustable soft start provide
design flexibility. The power-good output provides simple and
reliable power sequencing. Additional features include
programmable undervoltage lockout (UVLO), overvoltage
protection (OVP), overcurrent protection (OCP), and thermal
shutdown (TSD).
The ADP2380 operates over the −40°C to +125°C junction
temperature range and is available in a 16-lead TSSOP_EP
package.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Free Datasheet http://www.Datasheet4U.com

PagesPages 28
Télécharger [ ADP2380 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP2380 4 A Synchronous Step-Down Regulator Analog Devices
Analog Devices
ADP2381 6 A Synchronous Step-Down Regulator Analog Devices
Analog Devices
ADP2384 Step-Down DC-to-DC Regulator Analog Devices
Analog Devices
ADP2386 Synchronous Step-Down DC-to-DC Regulator Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche