|
|
Número de pieza | GRM022R60J104ME15 | |
Descripción | CHIP MONOLITHIC CERAMIC CAPACITOR | |
Fabricantes | Murata | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GRM022R60J104ME15 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
No Preview Available ! CHIP MONOLITHIC CERAMIC CAPACITOR FOR GENERAL
GRM022R60J104ME15_ (01005, X5R, 0.1uF, 6.3Vdc)
_: packaging code
Reference Sheet
1.Scope
This product specification is applied to Chip Monolithic Ceramic Capacitor used for General Electronic equipment.
2.MURATA Part NO. System
(Ex.) GRM
02
2
R6
(1)L/W (2)T
(3)Temperature
Dimensions Dimensions Characteristics
0J
(4)DC Rated
Voltage
104 M
(5)Nominal (6)Capacitance
Capacitance Tolerance
E15 L
(7)Murata’s (8)Packaging
Control Code
Code
3. Type & Dimensions
L
W
T
eg e
(1)-1 L
0.4±0.02
(1)-2 W
0.2±0.02
(2) T
0.2±0.02
e
0.07 to 0.14
(Unit:mm)
g
0.13 min.
4.Rated value
(3) Temperature Characteristics
(Public STD Code):X5R(EIA)
Temp. coeff
or Cap. Change
Temp. Range
(Ref.Temp.)
-15 to 15 %
-55 to 85 °C
(25 °C)
(4)
DC Rated
Voltage
(5) Nominal
Capacitance
(6)
Capacitance
Tolerance
6.3 Vdc 0.1 uF
±20 %
Specifications and Test
Methods
(Operationg
Temp. Range)
-55 to 85 °C
5.Package
mark
(8) Packaging
L f180mm Reel
EMBOSSED W4P1
Packaging Unit
40000 pcs./Reel
Product specifications in this catalog are as of Jan.23,2013,and are subject to change or obsolescence without notice.
Please consult the approval sheet before ordering.
Please read rating and !Cautions first.
GRM022R60J104ME15-01
1
Free Datasheet http://www.Datasheet4U.com
1 page ■SPECIFICATIONS AND TEST METHODS
Recommended derating conditions on voltage and temperature
These Part Numbers are designed for use in the circuits where
continuous applied voltage to the capacitor is derated than rated
voltage, and guarantee Durability Test with 100% × rated voltage
as testing voltage at the maximum operating temperature.
The following voltage and temperature derating conditions are
recommended for use to ensure the same reliability level as
normal specification.
JEMCGS-00047U
5
Free Datasheet http://www.Datasheet4U.com
5 Page チップ詰め状態
(単位:mm)
Package
GRM/F Type
1.3 Tapes for capacitors are wound clockwise shown in Fig.3.
(The sprocket holes are to the right as the tape is pulled toward the user.)
1.4 Part of the leader and part of the vacant section are attached as follows.
Tail vacant Section Chip-mounting Unit Leader vacant Section
Leader Unit
(Top Tape only)
(in:mm)
160 min.
190 min.
210 min.
Direction
of Feed
1.5 Accumulate pitch : 10 of sprocket holes pitch = 40±0.3mm
1.6 Chip in the tape is enclosed by top tape and bottom tape as shown in Fig.1.
1.7 The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.
1.8 There are no jointing for top tape and bottom tape.
1.9 There are no fuzz in the cavity.
1.10 Break down force of top tape : 5N min.
Break down force of bottom tape : 5N min. (Only a bottom tape existence )
図1 チッフ1゚詰.1め1 状Re態el is made by resin and appeaser and dime(n単si位on:mism)shown in Fig 2.
There are possibly to change the material and dimension due to some impairment.
1.12 Peeling off force : 0.1N to 0.6N* in the direction as shown below.
* GR□02/03:0.05N~0.5N
165~180°
Top tape
1.13 Label that show the customer parts number, our parts number, our company name, inspection
number and quantity, will be put in outside of reel.
JEMCGP-01796
11
Free Datasheet http://www.Datasheet4U.com
11 Page |
Páginas | Total 29 Páginas | |
PDF Descargar | [ Datasheet GRM022R60J104ME15.PDF ] |
Número de pieza | Descripción | Fabricantes |
GRM022R60J104ME15 | CHIP MONOLITHIC CERAMIC CAPACITOR | Murata |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |