|
|
PDF FS2096 Data sheet ( Hoja de datos )
| Número de pieza | FS2096 | |
| Descripción | Key-Operated Safety Switches | |
| Fabricantes | Clrwtr | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FS2096 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Key-Operated Safety Switches
with Solenoid
FS 2096-D024-F
Description
GE Interlogix Industrial Key-Operated Safety Switches with Solenoid
Release utilize a removable stainless steel key to provide a positive
means of turning the control power off should an access panel, door,
gate, guard, etc. be opened during machine operation. This series
of switches also includes a solenoid built into the switch and is used
to protect an area where access is to be strictly controlled. Prime
candidates for this series of safety switches are equipment that cannot
be shutdown in mid cycle, machines that have large mechanical inertia,
high temperatures or other areas that cannot be immediately entered.
The Key Operated Safety Switch with Solenoid Release denies access
to the protected area until the operator electrically allows the release
of the key. There are two versions of the Key-Operated Safety Switch
with Solenoid Release, Series “D” (de-energized) and “E” (energized).
With the key removed, access is allowed through the guard, gate, etc.,
to be opened. Since the safety switch contacts can only be closed when
the key is installed in the switch, the machine cannot be restarted until
the guard, gate, etc., is closed. This re-establishes the protection around
the machine.
The Series “D” switch locks in the key when the solenoid is
“de-energized” (without power). To remove the key, power must be
applied to the solenoid, which transfers the contacts. Reinserting the
key, when the power is removed from the solenoid transfers the
contacts and locks the key in place until power is applied to the
solenoid. If power is lost, the Series “D” switch is equipped with a
manual release to allow key removal.
The Series “E” switch locks in the key when the solenoid is “energized”
(powered up). The key is unlocked when power is removed from the
solenoid. The key must be in place before powering up the Series “E”
switch or the contacts will not be transferred. CAUTION: The Series “E”
switch will also allow the key to be removed should there be a power
failure. This is an important consideration when using this Series in
safety applications.
General Specifications
Enclosure
Polymeric glass-reinforced, self-extinguishing, shockproof
thermal-plastic providing double insulation
Standards
Use of this device implies compliance with standards:
EN 954-1, EN 60 204-1, EN 1088, UL508, IEC 947-5-1, EN 1088,
BG-GS-ET-19, EN50081-1, EN50082-2, 89/392/CEE, 73/23/CEE,
89/336/CEE, 93/68/CEE.
Order Information1
Electrical Specifications
Contact rating3
Model
Number
FS 2096-D024-F1
FS 2096-E024-F1
Body
Material
Thermal Plastic
Thermal Plastic
Contact2
Config.
2 N.C. + 1 N.O.
2 N.C. + 1 N.O.
Contact Operating
Voltage, Max.
600 VAC, 300 VDC4
600 VAC, 300 VDC4
Short Circuit
Protection, Max.
10A fuse
10A fuse
UL/CSA
IEC
Volts
10A A600/Q3004 (UL 508)
AC15
DC13
250 400 500
24 125
Current (A) 3 1 6
1.1 0.4
Warning— Each electrical rating is an individual maximum and cannot be exceeded!
1 Switches are furnished standard with F1 (90º) key. Other key styles available on Accessories page.
Switches are available with either a Power Key Release Solenoid type (D24) or a Power Key Retain Solenoid type (E24).
Solenoid types are NOT convertible in the field.
2 Configuration with key in
3 POSITIVE DOUBLE BREAK CONTACTS. Electrically isolated contacts allow different voltages placed on contact poles.
4 UL508
250
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Free Datasheet http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet FS2096.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FS209 | 2-PHASE DC MOTOR DRIVE IC |  Feeling Technology |
| FS2096 | Key-Operated Safety Switches | Clrwtr |
| FS2096-D024-F | Key-Operated Safety Switches | Clrwtr |
| FS2096-E024-F | Key-Operated Safety Switches | Clrwtr |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |