DataSheetWiki


MCP8024 fiches techniques PDF

Microchip - 3-Phase Brushless DC (BLDC) Motor Gate Driver

Numéro de référence MCP8024
Description 3-Phase Brushless DC (BLDC) Motor Gate Driver
Fabricant Microchip 
Logo Microchip 





1 Page

No Preview Available !





MCP8024 fiche technique
MCP8024
3-Phase Brushless DC (BLDC) Motor Gate Driver
with Power Module
Features:
• Three Half-bridge Drivers Configured to Drive
External High-Side NMOS and Low-Side NMOS
MOSFETs:
- Independent input control for high-side
NMOS and low-side NMOS MOSFETs
- Peak output current: 0.5A @ 12V
- Shoot-through protection
- Overcurrent and short circuit protection
• Adjustable Output Buck Regulator (750 mW)
• Fixed Output Linear Regulators:
- 5V @ 20 mA
- 12V @ 20 mA
• Internal Bandgap Reference
• Three Operational Amplifiers for Motor Phase
Current Monitoring and Position Detection
• Overcurrent Comparator
• Two Level Translators
• Operational Voltage Range 6 - 40V
• Undervoltage Lockout (UVLO): 6V
• Overvoltage Lockout (OVLO): 28V
• Transient (100 ms) Voltage Tolerance: 48V
• Extended Temperature Range: TA -40 to +150°C
• Thermal Shutdown
Applications:
• Automotive Fuel, Water, Ventilation Motors
• Home Appliances
• Permanent Magnet Synchronous Motor (PMSM)
Control
• Hobby Aircraft, Boats, Vehicles
Related Literature:
• AN885, “Brushless DC (BLDC) Motor Fundamen-
tals”, DS00885, Microchip Technology Inc., 2003
• AN1160, “Sensorless BLDC Control with Back-
EMF Filtering Using a Majority Function”,
DS01160, Microchip Technology Inc., 2008
• AN1078, “Sensorless Field Oriented Control of a
PMSM”, DS01078, Microchip Technology Inc.,
2010
Description:
The MCP8024 is a 3-Phase Brushless DC (BLDC)
power module. The MCP8024 device integrates three
half-bridge drivers to drive external NMOS/NMOS
transistor pairs configured to drive a 3-phase BLDC
motor, a comparator, a voltage regulator to provide bias
to a companion microcontroller, power monitoring
comparators, an overtemperature sensor, two level
translators and three operational amplifiers for motor
current monitoring.
The MCP8024 has three half-bridge drivers capable of
delivering a peak output current of 0.5A at 12V for
driving high-side and low-side NMOS MOSFET
transistors. The drivers have shoot-through,
overcurrent, and short-circuit protection.
The MCP8024 buck converter is capable of delivering
750 mW of power for powering a companion
microcontroller. The buck regulator may be disabled if
not used. The on-board 5V and 12V low dropout
voltage regulators are capable of delivering 20 mA of
current.
The MCP8024 operation is specified over a
temperature range of -40°C to +150°C.
Package options include the 40-lead 5x5 QFN and 48-
lead 7x7 TQFP.
2013 Microchip Technology Inc.
DS20005228A-page 1
Free Datasheet http://www.Datasheet4U.com

PagesPages 30
Télécharger [ MCP8024 ]


Fiche technique recommandé

No Description détaillée Fabricant
MCP8024 3-Phase Brushless DC (BLDC) Motor Gate Driver Microchip
Microchip
MCP8025 3-Phase Brushless DC (BLDC) Motor Gate Driver Microchip
Microchip
MCP8026 3-Phase Brushless DC (BLDC) Motor Gate Driver Microchip
Microchip

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche