DataSheetWiki


FKS2D012201A00 fiches techniques PDF

WIMA - Polyester (PET) Film and Foil Capacitors

Numéro de référence FKS2D012201A00
Description Polyester (PET) Film and Foil Capacitors
Fabricant WIMA 
Logo WIMA 





1 Page

No Preview Available !





FKS2D012201A00 fiche technique
WIMA FKS 2
Polyester (PET) Film and Foil
Capacitors for Pulse Applications
in PCM 5 mm
D
Special Features
˜ Pulse duty construction
˜ According to RoHS 2011/65/EU
Typical Applications
For general DC-applications e.g.
˜ Coupling
˜ Decoupling
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Metal foil
Internal construction:
Plastic film
Metal foil electrode
Terminating wire
Electrical Data
Capacitance range:
1000 pF to 0.047 mF (E12-values on request)
Rated voltages:
100 VDC, 250 VDC, 400 VDC
Capacitance tolerances:
± 20%, ±10%, ±5%
Operating temperature range:
–55+ C to +100+ C (+125° C available
subject to special enquiry)
Test specifications:
In accordance with IEC 60384-11
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
3 x 104 M¸
(mean value: 8 x 105 M¸)
Measuring voltage: 100 V/1 min.
Test voltage: 2 Ur, 2 sec.
Maximum pulse rise time:
1000 V/msec for pulses equal to the
rated voltage
Dissipation factors at +20+ C: tan d
at f
  1 kHz
  10 kHz
100 kHz
C 0.047 mF
  7 x 10-3
15 x 10-3
20 x 10-3
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life 300 000 hours
Failure rate 5 fit (0.5 x Ur and 40+ C)
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Silver.
Epoxy resin seal: Yellow.
Mechanical Tests
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in
accordance with IEC 60068-2-29
Packing
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
28
Free Datasheet http://www.datasheetlist.com/

PagesPages 8
Télécharger [ FKS2D012201A00 ]


Fiche technique recommandé

No Description détaillée Fabricant
FKS2D012201A00 Polyester (PET) Film and Foil Capacitors WIMA
WIMA

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche