DataSheetWiki


RF1419D fiches techniques PDF

RFM - SAW Filter

Numéro de référence RF1419D
Description SAW Filter
Fabricant RFM 
Logo RFM 





1 Page

No Preview Available !





RF1419D fiche technique
• Medical Band (402-405 MHz) Front-End Filter
• Low-Loss, Coupled-Resonator (Lithium Tantalate) LiTa03 Design
• Complies with Directive 2002/95/EC (RoHS)10
Pb
The RF1419D is a surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in the 402-405
MHz band. This filter is ideal for short range wireless medical data applications where small size and low
power consumption are required features. Receiver designs using this filter include superhet, direct
conversion or superregen. RFM’s advanced SAW design and fabrication technology is utilized to achieve high
performance and optimum loss with simple external impedance matching.
RF1419D
403.5 MHz
SAW Filter
Electrical Characteristics
Characteristic
Center Frequency at 25°C Absolute Frequency
Insertion Loss
Passband Ripple (Relative to ILMIN) 402-405 MHz
3 dB Bandwidth
Rejection Attenuation: (relative to ILmin)
358.5 MHz
358.5 - 384 MHz
415 - 423 MHz
423 - 503 MHz
Temperature
Freq. Temp. Coefficient
Frequency Aging
Absolute Value during the First Year
Impedance Match
Input/Output
Lid Symbolization (Y=year WW=week S=shift)
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
Sym
fc
ILMIN
BW3
FTC
|fA|
Notes
1, 2, 3
1, 3
1, 3
1, 3
1, 3
5
1
9
SM3838-8 Case
3.8 x 3.8
Minimum Typical Maximum
403.5
1.60 2.5
1.10 1.25
3.0 7.5
40 65
35 50
25 35
40 50
-37
10
50 Ohms
560 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
dB
dB
MHz
dB
ppm/k
ppm/yr
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range of -10°C to +60°C.
4. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
5. The design, manufacturing process, and specifications of this device are subject to change.
6. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
7. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
8. Tape and Reel Standard Per ANSI / EIA 481.
9. This product complies with Directive 2002/95/EC of the European Parlament and of the Council of 27 January 2003 on the restriction of the use of
certain hazadous substances in electrical and electronic equipment.
www.RFM.com E-mail: [email protected]
©2008 by RF Monolithics, Inc.
Page 1 of 3
RF1419D - 3/21/08
Free Datasheet http://www.datasheetlist.com/

PagesPages 3
Télécharger [ RF1419D ]


Fiche technique recommandé

No Description détaillée Fabricant
RF1419D SAW Filter RFM
RFM

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche