DataSheetWiki


SF2046B fiches techniques PDF

RMF - SAW Filter

Numéro de référence SF2046B
Description SAW Filter
Fabricant RMF 
Logo RMF 





1 Page

No Preview Available !





SF2046B fiche technique
®
• Designed for 802.16 and WIMAX Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Value
Units
+13 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SF2046B
456.44 MHz
SAW Filter
SMP-03
Electrical Characteristics
Characteristic
Nominal Center Frequency
Insertion Loss
Bandwidth, 2dB
Rejection
3 dB Bandwidth nominal, specify
40 dB min, Frequency lower
40 dB min, Frequency upper
Bandwidth, 40 dB min (Ultimate Rejection)
Group Delay (Across 1 dB frequencies)
Amplitude Ripple (Across 453.83 to 459.05) -15 to +85°C
Amplitude Ripple (Across 453.83 to 459.05) -40 to -15
Reflected Wave Signal Suppression
1 usec after main pulse
2 usec after main pulse
3 usec after main pulse
Input Impedance (Differential)
Output Impedance (Differential)
Temperature
Operating
Storage
Case Style
Lid Symbolization (YY=year, WW=week, S=shift, ##=sequence code)
See note 4
Sym
fC
Notes
1
Min
5.22
449.09
Typ
456.44
8.0
6.0
6.5
13.0
108
1.0
1.0
Max
9.1
464.79
315
2.5
3.9
20
30
40
200
200
-40 85
-40 85
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2046B YYWWS##
Units
MHz
dB
MHz
MHz
nsec pk-pk
dBpk-pk
dB
Ohms
Ohms
°C
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
9. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF2046B-020707
Page 1 of 3
Free Datasheet http://www.datasheetlist.com/

PagesPages 3
Télécharger [ SF2046B ]


Fiche technique recommandé

No Description détaillée Fabricant
SF2046B SAW Filter RMF
RMF

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche