|
|
PDF SF2030A Data sheet ( Hoja de datos )
| Número de pieza | SF2030A | |
| Descripción | 243.95 MHz SAW Filter | |
| Fabricantes | RFM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF2030A (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Preliminary
®
SF2030A
• Designed for PHS BTS IF Applications
• Excellent Size-to Performance Ratio
• Hermetic 11.5 X 4.0 mm Surface-Mount Case
• Complies with Directive 2002/95/EC (RoHS) Pb
Maximum Ratings
Rating
Operating Temperature Range
Storage Temperature Range
Maximum DC Voltage
Maximum Source Power
Maximum Soldering Profile
Value
Units
-15 to +80
°C
-40 to +85
°C
30 V
+15 dBm
260°C for 30sec
243.95 MHz
SAW Filter
SM1154-14
Electrical Characteristics
Nominal Frequency
Characteristic
Nominal Insertion Attenuation
Pass band width at 3 dB (Relative to Fn)
Point of left side
Point of right side
Amplitude Ripple (peak-valley)
FN - 110 kHz ---- Fn + 110kHz
Group Delay Ripple
FN - 110 kHz ---- Fn + 110kHz
Relative Attenuation (Relative to Fn)
Fn - 21.6 MHz
Fn - 21.4 MHz
Fn - 10.8 MHz
Fn - 1.2 MHz
Fn - 0.7 MHz
Fn - 0.6 MHz
Fn - 0.5 MHz
Fn + 0.5 MHz
Fn + 0.6 MHz
Fn + 0.7 MHz
Fn + 1.2 MHz
Fn + 10.8 MHz
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Sym
fN
Notes
B3dB
Min Typ Max
243.95
5
+150
-150
0.6 1.0
0.5
60
60
55
30
30
30
15
15
30
30
30
55
RFM SF2030A YYWWS
Units
MHz
dB
kHz
dB
µsec
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
7. US and international patents may apply.
8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
9. ©Copyright 1999, RF Monolithics Inc.
10. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2030A-10/25/07
Page 1
Free Datasheet http://www.datasheetlist.com/
1 page  
243.95 MHz
SAW Filter
SM1154-14 Case
14-Terminal Ceramic Surface-Mount Case
11.5 x 4.0 mm Nominal Footprint
Solder Pad
Termination
Lid
Body
Pb Free
Materials
Au plating 30 - 60 µinches (76.2-152 µm) over 80-
200 µinches (203-508 µm) Ni.
Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 µinches Thick
Al2O3 Ceramic
Dimension
A
B
C
D
E
F
G
H
Case Dimensions
mm
Min Nom Max Min
11.4 11.5 11.6 .442
3.8 4.0 4.2 .150
1.4 1.6 1.8 .057
1.3 1.5 1.7 .053
0.76
1.27
1.27
0.1
Inches
Nom
0.450
0.157
0.063
0.059
0.030
0.050
0.050
0.004
Max
0.458
.166
.069
.065
Input
Output
Ground
Electrical Connections
Connection
Terminals
2
9
All Others
Recommended PCB Footprint
0.067 TYP.
(1.70)
0.190
(4.84)
B
87
96
10 5
11 4
12 3
13 2
14 1
C
HD
G
7
6
5
4
3
2
1
8
9
10
11
12
13
14
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2030A-10/25/07
Page 5
Free Datasheet http://www.datasheetlist.com/
5 Page 
243.95 MHz
Test
Life at
1 Elevated
Temperature
2
Temperature
Cycling
Vibration,
3 Variable
Frequency
4
Mechanical
Shock
Destructive
5 Bond
Strength
6
Die Shear
Strength
7 Solderability
(Note 2)
8 Physical
Dimensions
9
Temperature
Characteristics
Terminal
10 Strength
(Note 2)
11
Resistance to
Solvents
12
Steady State
Life
13
Internal Water-
Vapor Content
14
Constant
Acceleration
15
Substrate
Attach Strength
SAW Filter
RFM Qualification and Reliability Test
Standard
Test Parameters
MIL-STD-202
Method 108
Condition C
1,000 Hours
125°C
Unbiased
JESD22
Method JA-104
Air-to-Air
-55 ×Cto +125 ×C
20 min. Dwell
1,000 cycles
MIL-STD-883
Method 2007
Condition B
50g Max.
4 Cycles, 3 Axis
20 Hz to 2 kHz to
20 Hz
MIL-STD-883
Method 2002
Condition B
MIL-STD-883
Method 2011
Condition C
1,500g Max.
5 Shocks
±3 Axis
Wire Bond Pull
Strength
MIL-STD-883
Method 2019
Shear Strength
J-STD-002
Method B
JESD22
Method JB-100
RFM Procedure
MIL-STD-833
Method 2004
Condition A & D
MIL-STD-883
Method 2015
MIL-STD-883
Method 1005
MIL-STD-883
Method 1018
MIL-STD-883
Method 2001
Y1 Direction
MIL-STD-883
Method 2027
8 hr. steam age
245 × C solder
temperature
5 second dwell
Critical
Dimensions
Frequency over
Temperature
Cond. A-Lead
Tension
Cond. B -Pad
Adhesionr 24
Solvents a, b, d
1,000 Hours
Max. Operating
Temperature
Rated Voltage
30,000g
Tensile Strength of
Die Attachment
Pass / Fail Criteria
Within
Electrical &
Hermetic Spec.
(Note 1)
2.0 grams
(After Seal)
0.6 kg
(Strength/area
limit in
development)
>95% wetted
surface
Within
specifications
Within
specifications
8 oz. - 30 sec.
Visual Requirements
& meets
Hermetic Spec.
Visual
Requirements
Within
Electrical &
Hermetic Spec.
(Note 1)
< 5,001 PPM
Within
Electrical &
Hermetic Spec.
(Note 1)
Custom per Device
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2030A-10/25/07
Page 11
Free Datasheet http://www.datasheetlist.com/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SF2030A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF2030A | 243.95 MHz SAW Filter | RFM |
| SF2030A-AQ | Common mode:Wide band/High attenuation Dood |  Soshin |
| SF2030A-AS | Common mode:Wide band/High attenuation Dood | Soshin |
| SF2030BC | Super Fast Rectifier |  Galaxy Microelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |