|
|
PDF SF1111A Data sheet ( Hoja de datos )
| Número de pieza | SF1111A | |
| Descripción | 160 MHz SAW Filter | |
| Fabricantes | RFM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF1111A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
• Designed for CDMA2000 BTS Applications
• Simple External Impedance Matching
• Hermetic SMP-97 Surface-Mount Case
• Unbalanced Input and Output
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max. Soldering Profile
Pb
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
1.5 dB Passband
3 dB Passband
Amplitude Ripple over fc ±470 kHz
Phase Linearity over fc ±590 kHz
Rejection
fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 MHz
fc-20 to fc-10.0 and fc+10.0 to fc+20 MHz
Operating Temperature Range
Sym
fC
IL
BW1.5
BW3
TA
Notes
1
1, 2
1, 2, 3
1
Min
±590
40
50
-20
SF1111A
160 MHz
SAW Filter
Typ
160.000
9
±750
0.7
10
SMP-97
Max
11.0
1.0
20
+70
Units
MHz
dB
kHz
dB
degP-P
dB
°C
Impedance Matching to 50 Ω Unbalanced
Case Style
Lid Symbolization (YY = year, WW = week)
External L-C
SMP-97 24.6 x 9 mm Nominal Footprint
RFM SF1111A YYWW
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter
soldered to the specified demonstration board with impedance matching to 50 Ω and measured
with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center
frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in
final user application is dependent on PCB layout and external impedance matching design.
See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E"
indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design. However,
impedances and impedance matching may vary between Port 1 and Port 2, so that the filter
must always be installed in one direction per the circuit design.
7. US and international patents may apply.
Electrical Connections
Connection
Port 1 Hot
Port 1 Gnd Return
Port 2 Hot
Port 2 Gnd Return
Case Ground
Terminals
10
1
5
6
All others
www.RFM.com E-mail: [email protected]
©2008 by RF Monolithics, Inc.
Page 1 of 4
SF1111A - 7/17/08
Free Datasheet http://www.datasheetlist.com/
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet SF1111A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF1111A | 160 MHz SAW Filter | RFM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |