|
|
PDF ICP-N70 Data sheet ( Hoja de datos )
| Número de pieza | ICP-N70 | |
| Descripción | Circuit protection elements | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ICP-N70 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Overcurrent Protection Elements
Circuit protection elements
IC protector
zCircuit protection elements
Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental
short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in
normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded.
zFeatures
1) Cutoff is sharp and repeatable.
2) Low internal resistance and minimal voltage drop.
3) Incombustible.
4) Compact.
5) Rated for continuous use.
6) Good temperature characteristics.
7) Withstands surges well.
8) UL certified (UL certification number E107856).
zApplication
Current surge protection
zOperation notes
Do not use this product on the primary side of commercial power supplies. Arcs that result after cutoff may damage the
molding.
Surface mounting Type
zICP-S series
Product
name
ICP-S0.5
ICP-S0.7
ICP-S1.0
ICP-S1.2
Rated
Cutoff Internal resistance Rated
Operating
Storage
current (A) characteristics
Typ.(Ω)
voltage (V) temperature (°C) temperature (°C)
0.5 Fig.1
0.150
0.7 Fig.2
1.0 Fig.3
0.084
0.061
50
−55 to +125
−55 to +125
1.2 Fig.4
0.048
Rev.A
1/5
1 page  
Overcurrent Protection Elements
IC protector
10
1
0.1 Typ.
0.01
0.001
0 4 8 12 16 20 24 28 32 36
CUTOFF CURRENT : (A)
Fig.7 ICP-N70
The cutoff characteristics given represent typical values. Technical documentation regarding ways of using circuit
protectors is available from your Rohm representative.
zExternal dimensions (Unit : mm)
ICP-N10/N15/N20/N25/N38/N50/N70
5.0±0.2
4.0±0.2
0.5 0.5 0.45±0.1
zPackaging specifications
Packaging type
Taping
ICP-N
Type
Symbol
Basic ordering
unit (pieces)
T104
3000
ICP-N10/N15/N20/N25/N38/N50/N70
5.0
+0.6
−0.2
zTaping specifications (Unit : mm)
ICP-N taping (T104)
6.35±0.5 12.7±0.5
0±0.5 5.2Max.
3.85±0.5
0±1.0
4.2Max.
0.5±0.1
φ4.0±0.2
6.35±0.5
5.0
+0.6
−0.2
12.7±0.3
ICP-N zigzag fold taping
275
40
Rev.A
5/5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet ICP-N70.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ICP-N70 | Circuit protection elements | ROHM Semiconductor |
| ICP-N75 | ICP Series | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |