DataSheetWiki


KX-TS500MX fiches techniques PDF

Panasonic - Telephone Operating Instructions Manual

Numéro de référence KX-TS500MX
Description Telephone Operating Instructions Manual
Fabricant Panasonic 
Logo Panasonic 





1 Page

No Preview Available !





KX-TS500MX fiche technique
1 Getting Started
2 Operation
Integrated Telephone System
Operating Instructions
Model No. KX-TS500MX
Pulse-or-tone dialing capability
1-A Location of controls
DIALING MODE Selector
(1-B)
RINGER Selector
(1-B)
VOLUME (^), (_)
Buttons (2-A)
7 48 15 26PQRS
GHI
TUV
ABC
JKL
MNO
WXYZ
DEF
3
VOLUME
0TONE
9
FLASH
REDIAL
($) (TONE) Button (3-B)
(FLASH) Button
(3-A)
(REDIAL) Button (2-A)
KX-TS500MXW
PLEASE READ BEFORE USE AND SAVE.
Accessories (included)
Handset. . . . . . . one Telephone Line Cord
Handset Cord. . . one
. . . . . . . . . . . . . one
1-B Settings
1 Connect the telephone line cord (1).
2 Connect the handset cord (2), then confirm
the dial tone.
To Single-Line
Telephone Jack
3 Set the DIALING MODE selector to TONE.
If you cannot dial, set to PULSE.
DIALING MODE
TONE PULSE
Telephone Line Cord
1
DIALING MODE
Selector
RINGER Selector
4 Set the RINGER selector to HIGH, LOW or
OFF.
(Ex. “LOW” is selected.)
RINGER
HIGH
OFF
2
Handset
When set to OFF, the unit will not ring.
Handset Cord
2-A Making Calls
1 Lift the handset.
2 Dial a phone number.
If you misdial, hang up and start again from
step 1.
3 When finished talking, hang up.
To redial the last number dialed
Lift the handset. Press (REDIAL).
To adjust the receiver volume (6 levels)
while talking
To increase, press (^).
To decrease, press (_).
After hanging up, the volume level will be saved.
2-B Answering Calls
1 When the unit rings, lift the handset.
2 When finished talking, hang up.
3 Special Features
3-A For Call Waiting Service Users
Press (FLASH) if you hear a call-waiting tone
while talking.
The first call is put on hold and you can answer the
second call.
To return to the first caller, press (FLASH) again.
3-B Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press ($) (TONE) before entering access
numbers which require tone dialing.
The dialing mode changes to tone. You can enter
numbers to access answering services, electronic
banking services, etc. When you hang up, the
mode will return to pulse.
Access numbers entered after pressing ($) (TONE)
will not be included when redialing.
For your future reference
Serial No.
(found on the bottom of the unit)
Date of purchase
Name and address of dealer
If trouble occurs, disconnect the unit from the
telephone line and connect to a known working
phone. If the known working phone operates
properly, do not reconnect the unit until the trouble
has been repaired. If the known working phone
does not operate properly, consult your telephone
company.
4 Things You Should Know
4-A Wall Mounting
The unit can be mounted on a wall.
1 Press the tabs in the direction of the arrows
(1), then remove the wall mounting adaptor
(2).
2
3 Install screws using the wall template
below. Connect the telephone line cord.
Mount the unit, then slide down.
Fasten the cord to prevent it from being
disconnected.
Screws
11
2 Tuck the telephone line cord inside the wall
mounting adaptor, and push it in the
direction of the arrow (1 and 2).
The word “UP WALL” should face upward.
Hooks
8.3 cm
Manufactured by Panasonic
Communications (Malaysia) Sdn. Bhd.
Senai Malaysia
PQQX13679XA F0403-2073 D
2
Wall Template
1 8.3 cm
To Single-Line
Telephone Jack
To temporarily set the
handset down during
a conversation, place
it as shown here.
4-B Troubleshooting
Problem
The unit does not
work.
The call cannot be
connected even if
you dialed
correctly.
The unit does not
ring.
Remedy
Check the settings (1-B).
Check whether the
DIALING MODE selector
setting is correct or not
(1-B).
The RINGER selector is
set to OFF. Set to HIGH
or LOW (1-B).
4-C Safety Instructions
Take special care to follow the safety suggestions
listed below.
Installations
Environment
1) Do not use this unit near water—for example,
near a bathtub, washbowl, sink, etc. Damp
basements should also be avoided.
2) The unit should be kept away from heat sources
such as radiators, kitchen range, etc. It also
should not be placed in rooms where the
temperature is less than 5oC or greater than 40oC.
Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall
onto, and liquids are not spilled into, the unit. Do
not subject this unit to excessive smoke, dust,
mechanical vibration or shock.
3) Place the unit on a flat surface.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR ANY
TYPE OF MOISTURE.
4-D Specifications
Power Source:
From telephone line
Dimensions (H x W x D):
Approx. 96 mm x 150 mm x 200 mm
Mass (Weight):
Approx. 475 g
Dialing Mode:
Tone (DTMF)/Pulse
Operating Environment: 5°C–40°C
Specifications are subject to change without notice.

PagesPages 2
Télécharger [ KX-TS500MX ]


Fiche technique recommandé

No Description détaillée Fabricant
KX-TS500MX Telephone Operating Instructions Manual Panasonic
Panasonic

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche