|
|
Número de pieza | LDS6010 | |
Descripción | Capacitance Touch IC | |
Fabricantes | Leadis | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LDS6010 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! PRELIMINARY
Sight Sound Touch
PRODUCT BRIEF
LDS6010
LDS6010
PureTouch™ Capacitance Touch IC with Integrated
VibeTonz®-Ready Haptics Driver
The LDS6010 is a programmable capacitance-to-digital converter (CDC)
designed for use with capacitive sensor arrays implementing touch-based
input controls including sliders, scroll wheels, and buttons. A built-in
VibeTonz®-Ready haptics driver enables efficient integration of advanced
tactile feedback without the need for a separate IC. Touch sensor inputs
are directed through an integrated switch matrix to a 16-bit 500 kHz sigma-
delta CDC which senses changes in the external sensor array. Featuring 15
sensor inputs, the LDS6010 provides the flexibility required to implement
multiple tactile-enabled touch inputs using a single controller.
On-chip calibration logic continuously monitors the environment and
automatically adjusts on-and-off threshold levels to prevent false sensor
activation.
The LDS6010 is offered with both SPI-compatible and I2C-compat-
ible interfaces (active interface selected by I/F Toggle pin) and features
a general-purpose input/output (GPIO) and interrupt output for additional
communication with the host processor.
LDS6010 Block Diagram
LDS6010 Features
Versatile, Accurate
Capacitance-to-Digital
Converter (CDC)
• 16-bit, 500kHz
sigma-delta CDC
• 15 capacitance sensor
input channels
• 2ms update rate per
active sensor
Full-Featured Haptics Driver
• Drives both linear and
rotating actuators
• Intelligent PWM input enabling
automatic standby mode
• Internal voltage regulator
enables direct connection to
Vbattery with no degrada-
tion in haptics effects
Integrated, Automatic
Calibration Algorithms
• Environmental compensation
• On-chip RAM to store
calibration data
Integrated Touch
Preference Modes
• Strongest Single Touch
• Strongest Two Touches
• Unrestricted (All) Touches
Low Power Consumption
• Operating mode (typical,
haptics in standby):
<150uW (VDD1=1.8V)
• Shutdown mode (typical):
<1uW (VDD1=1.8V,
VDD2=3.6V)
1
Free Datasheet http://www.datasheet4u.net/
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet LDS6010.PDF ] |
Número de pieza | Descripción | Fabricantes |
LDS6010 | Capacitance Touch IC | Leadis |
LDS6010 | Capacitance Touch IC | IDT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |