DataSheetWiki


HFA70NH60 fiches techniques PDF

International Rectifier - Ultrafast/ Soft Recovery Diode

Numéro de référence HFA70NH60
Description Ultrafast/ Soft Recovery Diode
Fabricant International Rectifier 
Logo International Rectifier 





1 Page

No Preview Available !





HFA70NH60 fiche technique
HEXFREDTM
Features
• Reduced RFI and EMI
• Reduced Snubbing
• Extensive Characterization of
Recovery Parameters
PD -2.457 rev. B 02/99
HFA70NH60
Ultrafast, Soft Recovery Diode
LUG
TERMINAL
ANODE
ad
BASE CATHODE
VR = 600V
VF(typ.)ƒ = 1.2V
IF(AV) = 70A
Qrr (typ.) = 340nC
IRRM(typ.) = 8.5A
trr(typ.) = 33ns
di(rec)M/dt (typ.)ƒ = 220A/µs
Description
HEXFREDTMdiodes are optimized to reduce losses and EMI/RFI in high frequency
power conditioning systems. An extensive characterization of the recovery
behavior for different values of current, temperature and di/dt simplifies the
calculations of losses in the operating conditions. The softness of the recovery
eliminates the need for a snubber in most applications. These devices are
ideally suited for power converters, motors drives and other applications where
switching losses are significant portion of the total losses.
Absolute Maximum Ratings (per Leg)
HALF-PAK
VR
IF @ TC = 25°C
IF @ TC = 100°C
IFSM
EAS
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Parameter
Cathode-to-Anode Voltage
Continuous Forward Current
Continuous Forward Current
Single Pulse Forward Current 
Non-Repetitive Avalanche Energy ‚
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max.
600
126
63
400
220
310
125
-55 to +150
Units
V
A
µJ
W
°C
Thermal - Mechanical Characteristics
RthJC
RthCS
Wt
Parameter
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Weight
Mounting Torque „
Terminal Torque
Vertical Pull
2 inch Lever Pull
Min.
––––
––––
––––
15 (1.7)
30 (3.4)
––––
––––
Typ.
––––
0.15
26 (0.9)
––––
––––
––––
––––
Max.
0.4
––––
––––
25 (2.8)
40 (4.6)
35
35
Units
°C/W
K/W
g (oz)
lbf•in
(N•m)
lbf•in
Note:  Limited by junction temperature
‚ L = 100µH, duty cycle limited by max TJ
ƒ 125°C
„ Mounting surface must be smooth, flat, free or burrs or other
protrusions. Apply a thin even film or thermal grease to mounting
surface. Gradually tighten each mounting bolt in 5-10 lbf•in steps
until desired or maximum torque limits are reached. Module
1

PagesPages 5
Télécharger [ HFA70NH60 ]


Fiche technique recommandé

No Description détaillée Fabricant
HFA70NH60 Ultrafast/ Soft Recovery Diode International Rectifier
International Rectifier

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche