DataSheet39.com

What is 33663?

This electronic component, produced by the manufacturer "Freescale Semiconductor", performs the same function as "LIN 2.1 / SAEJ2602-2 Dual LIN Physical Layer".


33663 Datasheet PDF - Freescale Semiconductor

Part Number 33663
Description LIN 2.1 / SAEJ2602-2 Dual LIN Physical Layer
Manufacturers Freescale Semiconductor　
Logo Freescale Semiconductor Logo　


There is a preview and 33663 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! 33663 datasheet, circuit

Freescale Semiconductor
Advance Information
Document Number: MC33663
Rev. 1.0, 7/2012
LIN 2.1 / SAEJ2602-2 Dual LIN
Physical Layer
33663
The local interconnect network (LIN) is a serial communication
protocol designed to support automotive networks in conjunction with
controller area network (CAN). As the lowest level of a hierarchical
network, LIN enables cost-effective communication with sensors and
actuators when all the features of CAN are not required.
The 33663 product line integrates two physical layer LIN bus
dedicated to automotive LIN sub-bus applications. The MC33663LEF
and MC33663SEF devices offer normal baud rate (20 kbps) and the
MC33663JEF slow baud rate (10 kbps). Both devices integrate fast
baud rate (above 100 kbps) for test and programming modes. They
present excellent electromagnetic compatibility (EMC) and radiated
emission performance, electrostatic discharge (ESD) robustness and
safe behavior, in the event of LIN bus short-to-ground or LIN bus
leakage during low-power mode.
DUAL LIN TRANSCEIVER
EF SUFFIX (PB-FREE)
98ASB42565B
14-PIN SOICN
Features
ORDERING INFORMATION
• Operational from VSUP 7.0 to 18 V DC, functional up to 27 V DC,
and handles 40 V during load dump
• Compatible with LIN protocol specification 2.1, and SAEJ2602-2
Device
(add an R2 suffix for
Tape and reel orders)
Temperature
Range (TA)
Package
• Very high immunity against electromagnetic interference
• Low standby current in Sleep mode
MC33663ALEF
• Over-temperature protection
MC33663AJEF
-40 to 125°C
14 SOICN
• Permanent dominant state detection
• Fast baud rate mode selection reported by RXD
MC33663ASEF
• Active bus waveshaping offering excellent radiated emission
performance
• Sustains ±15.0 kV ESD IEC6100-4-2 on LIN BUS and VSUP pins
• 5.0 and 3.3 V compatible digital inputs without any external components required
VBAT
Regulator
12 V
5.0 or
3.3 V
MCU
VDD
33663
VSUP
WAKE1
EN1
RXD1
TXD1
WAKE2
INH1
INH2
EN2
RXD2
TXD2
LIN1
GND LIN2
1.0 k
1.0 k
LIN Interface 1
LIN Interface 2
Figure 1. 33663 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2012. All rights reserved.
Free Datasheet http://www.datasheet4u.com/

line_dark_gray
33663 equivalent
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 3. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Power Supply Voltage (VSUP)
Normal Operation (DC)
Transient input voltage with external component (according to ISO7637-2 &
ISO7637-3 & “Hardware Requirements for LIN, CAN, and Flexray Interfaces
in Automotive Applications” specification Rev. 1.1/December 2nd, 2009) (See
Table 4 and Figure 4)
- Pulse 1 (test up to the limit for Damage - Class A(1))
- Pulse 2a (test up to the limit for Damage - Class A(1))
- Pulse 3a (test up to the limit for Damage - Class A(1))
- Pulse 3b (test up to the limit for Damage - Class A(1))
- Pulse 5b (Class A)(1)
Logic Voltage (RXD1,2, TXD1,2, EN1,2 Pins)
WAKE (VWAKE1,VWAKE2)
Normal Operation with in series 2*18 kresistor (DC)
Transient input voltage with external component (according to ISO7637-2 &
ISO7637-3 & “Hardware Requirements for LIN, CAN and Flexray Interfaces
in Automotive Applications” specification Rev1.1 / December 2nd, 2009) (See
Table 4 and Figure 5)
- Pulse 1 (test up to the limit for Damage - Class D(2))
- Pulse 2a (test up to the limit for Damage - Class D(2))
- Pulse 3a (test up to the limit for Damage - Class D(2))
- Pulse 3b (test up to the limit for Damage - Class D(2))
VSUP(SS)
VSUP(S1)
VSUP(S2A)
VSUP(S3A)
VSUP(S3B)
VSUP(S5B)
VLOG
VWAKE(SS)
VWAKE(S1)
VWAKE(S2A)
VWAKE(S3A)
VWAKE(S3B)
-0.3 to 27
-100
+75
-150
+100
-0.3 to 40
-0.3 to 5.5
-27 to 40
-100
+75
-150
+100
V
V
V
LIN Bus Voltage (VLIN1, VLIN2)
Normal Operation (DC)
Transient (Coupled Through 1.0 nF Capacitor) (according to ISO7637-2 &
ISO7637-3) (See Table 4 and Figure 6)
- Pulse 1 (test up to the limit for Damage - Class D(2))
- Pulse 2a (test up to the limit for Damage - Class D(2))
- Pulse 3a (test up to the limit for Damage - Class D(2))
- Pulse 3b (test up to the limit for Damage - Class D(2))
VLIN(SS)
VLIN(S1)
VLIN(S2A)
VLIN(S3A)
VLIN(S3B)
-27 to 40
-100
+75
-150
+100
V
Notes
1. Class A: All functions of a device/system perform as designed during and after exposure to disturbance.
2. Class D: At least one function of the Transceiver stops working properly during the test and will return into proper operation automatically
when the exposure to the disturbance has ended. No physical damage of the IC occurs.
Analog Integrated Circuit Device Data
Freescale Semiconductor
33663
5
Free Datasheet http://www.datasheet4u.com/


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 33663 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 33663.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
33660The function is ISO K Line Serial Link Interface. Freescale SemiconductorFreescale Semiconductor
33661The function is LIN Enhanced Physical Interface. Motorola IncMotorola Inc
33663The function is LIN 2.1 / SAEJ2602-2 Dual LIN Physical Layer. Freescale SemiconductorFreescale Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

3366     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search