|
|
Número de pieza | GA1621 | |
Descripción | multi-function LCD driver | |
Fabricantes | SilvanChip | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GA1621 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! GA1621
LCD 驱动电路
GA1621General Description
The GA1621 is a 128 dots (32x4), memory mapping, and multi-function LCD driver. The S/W con-figuration feature of the
GA1621 makes it suitable for multiple LCD applications including LCD modules and display subsystems. Only three or four
lines are required for the interface between the host controller and the GA1621. The GA1621 contains a power down command to
reduce power consumption.
GA1621Features
z Operating voltage: 2.4V~5.2V
z Built-in 256kHz RC oscillator
z Software configuration feature
z Data mode and command mode instructions
z 8 kinds of time base/WDT clock sources
z R/W address auto increment
z 32x4 LCD driver
z Three data accessing modes
z 3-wire serial interface
z Power down command reduces power
z Internal LCD driving frequency source
Consumption
GA1621Pad Assignment
IC SIZE:2.20mm X 2.15mm
The ic cubstrate should be connecte to VDD in PCB layout artwork
森川电子科技有限公司
TEL: 0755-88291843 88304213
ADD: 深圳市福田滨河路海滨广场福长阁 16 楼
E-mail: [email protected]
Http:// www.sc-tech.cn
Free Datasheet http://www.datasheet4u.com/
1 page GA1621
LCD 驱动电路
GA1621 Commanded Formant
The GA1621 can be configured by the S/W setting.
on the other hand, includes READ, WRITE, and
There are two mode commands to configure the GA1621
READ-MODIFY-WRITE operations. The following are the
resources and to transfer the LCD display data. The
configuration mode of the GA1621 is called command mode,
and its command mode ID is 1 0 0. The command mode
consists of a system configuration command, a system
frequency selection command, a LCD configuration
data
mode
IDs
and the
comm
Operation
READ
WRITE
READ-MODIFY-WRITE
COMMAND
Mode
Data
Data
Data
Command
ID
110
101
101
100
command, a tone frequency selection command, a timer/WDT and mode ID:
setting command, and an operating command. The data mode,
The mode command should be issued before the data or command is transferred. If successive commands have been issued,
the command mode ID, namely 1 0 0, can be omitted. While the system is operating in the non-successive command or the
non-successive address data mode, the CS- pin should be set to “1” and the previous operation mode will be reset also. Once the
CS- pin returns to “0” a new operation mode ID should be issued first.
森川电子科技有限公司
TEL: 0755-88291843 88304213
ADD: 深圳市福田滨河路海滨广场福长阁 16 楼
E-mail: [email protected]
Http:// www.sc-tech.cn
Free Datasheet http://www.datasheet4u.com/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet GA1621.PDF ] |
Número de pieza | Descripción | Fabricantes |
GA1621 | multi-function LCD driver | SilvanChip |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |