DataSheetWiki


07XSF517 fiches techniques PDF

Freescale Semiconductor - Triple 7.0 mOhm and Dual 17 mOhm High Side Switch

Numéro de référence 07XSF517
Description Triple 7.0 mOhm and Dual 17 mOhm High Side Switch
Fabricant Freescale Semiconductor 
Logo Freescale Semiconductor 





1 Page

No Preview Available !





07XSF517 fiche technique
Freescale Semiconductor
Advance Information
Triple 7.0 mOhm and Dual
17 mOhm High Side Switch
Document order number: MC07XSF517
Rev. 2.0, 9/2013
07XSF517
The 07XSF517 is the latest achievement in DC motors and lighting
drivers. It belongs to an expanding family to control and diagnose
various types of loads, such as incandescent lamps or light-emitting
diodes (LEDs) with enhanced precision. It combines flexibility through
daisy chainable SPI 5.0 MHz, extended digital and analog feedbacks,
safety, and robustness.
Output edge shaping helps to improve electromagnetic performance.
To avoid shutting off the device upon inrush current, while still being
able to closely track the load current, a dynamic overcurrent threshold
profile is featured. Current of each channel can be sensed with a
programmable sensing ratio. Whenever communication with the
external microcontroller is lost, the device enters a Fail operation mode,
but remains operational, controllable, and protected.
This new generation of high side switch products family facilitates ECU
design due to compatible MCU software and PCB foot prints for each
device variant.
This family is packaged in a Pb-free power-enhanced SOIC package
with an exposed pad, which is End of Life Vehicles directive compliant.
This device is powered by SMARTMOS technology.
Features
• Triple 7.0 mand dual 17 mhigh side switches with high transient
current capability
• 16-bit 5.0 MHz SPI control of overcurrent profiles, channel control
including PWM duty-cycles, output-ON and -OFF OpenLoad
detections, thermal shut-down and prewarning, and fault reporting
• Output current monitoring with programmable synchronization signal
and supply voltage feedback
• Limp Home mode
• External smart power switch control
• Operating voltage is 7.0 to 18 V with sleep current < 5.0 µA,
extended mode from 6.0 to 28 V
• -16 V reverse polarity and ground disconnect protections
• Compatible PCB foot print and SPI software driver among the family
ENHANCED PENTA HIGH SIDE SWITCH
EK SUFFIX (PB-FREE)
98ASA00367D
54-PIN SOICEP
Applications
• Low voltage exterior lighting
• Low voltage industrial lighting
• Low voltage automation systems
• Halogen lamps
• Incandescent bulbs
• Light-emitting diodes (LEDs)
• HID Xenon ballasts
• DC motors
VPWR
VPWR VCC
5.0 V
Regulator
GND
VCC
Main
MCU
GND
SO
CSB
SCLK
SI
RSTB
CLK
A/D1
TRG1
PORT
PORT
PORT
PORT
PORT
A/D2
07XSF517
VCC
VPWR
SI CP
CSB
SCLK
OUT1
SO
RSTB
OUT2
CLK
CSNS
OUT3
SYNCB
LIMP
OUT4
IN1 OUT5
IN2
IN3
IN4 GND OUT6
VPWR
Solenoid
LED Module
DC Motor M
Resistive load
Bulb
IN VPWR OUT
Smart Power
CSNS GND
Spare
Figure 1. Triple 7.0 mOhm and Dual 17 mOhm Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2013. All rights reserved.
Free Datasheet http://www.datasheet4u.com/

PagesPages 30
Télécharger [ 07XSF517 ]


Fiche technique recommandé

No Description détaillée Fabricant
07XSF517 Triple 7.0 mOhm and Dual 17 mOhm High Side Switch Freescale Semiconductor
Freescale Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche