DataSheetWiki


33905 fiches techniques PDF

Freescale Semiconductor - (33903 - 33905) SBC Gen2

Numéro de référence 33905
Description (33903 - 33905) SBC Gen2
Fabricant Freescale Semiconductor 
Logo Freescale Semiconductor 





1 Page

No Preview Available !





33905 fiche technique
Freescale Semiconductor
Technical Data
SBC Gen2 with CAN High Speed
and LIN Interface
The 33903/4/5 is the second generation family of the System Basis
Chip (SBC). It combines several features and enhances present
module designs. The device works as an advanced power
management unit for the MCU with additional integrated circuits such
as sensors and CAN transceivers. It has a built-in enhanced high-speed
CAN interface (ISO11898-2 and -5) with local and bus failure
diagnostics, protection, and fail-safe operation modes. The SBC may
include zero, one or two LIN 2.1 interfaces with LIN output pin switches.
It includes up to four wake-up input pins that can also be configured as
output drivers for flexibility.
This device implements multiple Low-power (LP) modes, with very
low-current consumption. In addition, the device is part of a family
concept where pin compatibility adds versatility to module design.
The 33903/4/5 also implements an innovative and advanced fail-safe
state machine and concept solution.
Features
• Voltage regulator for MCU, 5.0 or 3.3 V, part number selectable, with
possibility of usage external PNP to extend current capability and
share power dissipation
• Voltage, current, and temperature protection
• Extremely low quiescent current in LP modes
• Fully-protected embedded 5.0 V regulator for the CAN driver
• Multiple under-voltage detections to address various MCU
specifications and system operation modes (i.e. cranking)
• Auxiliary 5.0 or 3.3 V SPI configurable regulator, for additional ICs,
with over-current detection and under-voltage protection
• MUX output pin for device internal analog signal monitoring and
power supply monitoring
• Advanced SPI, MCU, ECU power supply, and critical pins
diagnostics and monitoring.
• Multiple wake-up sources in LP modes: CAN or LIN bus,
I/O transition, automatic timer, SPI message, and VDD over-current
detection.
• ISO11898-5 high-speed CAN interface compatibility for baud rates of
40 kb/s to 1.0 Mb/s
• Scalable product family of devices ranging from 0 to 2 LINs which are
compatible to J2602-2 and LIN 2.1
Document Number: MC33903_4_5
Rev. 9.0, 2/2012
333990033/4//5
SYSTEM BASIS CHIP
EK Suffix (Pb-free)
98ASA10556D
32-PIN SOIC
EK Suffix (Pb-free)
98ASA10506D
54-PIN SOIC
Freescale Semiconductor, Inc. reserves the right to change the detail specifications,
as may be required, to permit improvements in the design of its products.
© Freescale Semiconductor, Inc., 2010 - 2012. All rights reserved.
Free Datasheet http://www.datasheet4u.com/

PagesPages 30
Télécharger [ 33905 ]


Fiche technique recommandé

No Description détaillée Fabricant
3390 Optoelectronic Switch - Twilight Sensor Allegro MicroSystems
Allegro MicroSystems
33903 (33903 - 33905) SBC Gen2 Freescale Semiconductor
Freescale Semiconductor
33904 (33903 - 33905) SBC Gen2 Freescale Semiconductor
Freescale Semiconductor
33905 (33903 - 33905) SBC Gen2 Freescale Semiconductor
Freescale Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche