DataSheetWiki


ECWU1H104JC9 fiches techniques PDF

Panasonic - Stacked Metallized PEN Film Chip Capacitor

Numéro de référence ECWU1H104JC9
Description Stacked Metallized PEN Film Chip Capacitor
Fabricant Panasonic 
Logo Panasonic 





1 Page

No Preview Available !





ECWU1H104JC9 fiche technique
Stacked Metallized PEN Film Chip Capacitor
Type: ECWU(C)
Plastic Film Capacitors
Stacked metallized PEN film as dielectric with simple
mold-less construction
I Features
Small in size
For reflow soldering
RoHS directive compliant
IRecommended Applications
General purpose (Coupling, By-pass)
IExplanation of Part Numbers
12
EC
Product code
34
WU
Dielectric
&
construction
56
Rated voltage
7 8 9 10 11
C
Nominal capacitance Cap. Tol. Suffix
12
Suffix
1C 16 VDC
1H 50 VDC
1 100 VDC
2 250 VDC
J ±5 %
K ±10 %
Tape width
9 12 mm
V 16 mm
I Specifications
Category temp.range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
16 VDC, 50 VDC : -55 ˚C to +105 ˚C
100 VDC, 250 VDC : -55 ˚C to +125 ˚C
16 VDC, 50 VDC, 100 VDC, 250 VDC
(100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/˚C more than 85 ˚C)
16 VDC
0.12 µF to 0.47 µF (E12)
50 VDC
0.056 µF to 0.22 µF (E12)
100 VDC
0.012 µF to 1.0 µF (E12)
250 VDC
0.0010 µF to 0.12 µF (E12)
16 VDC, 50 VDC ±5 %(J)
100 VDC
±5 %(J), ±10 %(K) (C=>0.18 µF : ±10 %(K)only)
250 VDC
±5 %(J), ±10 %(K)
Between terminals: Rated volt. (VDC)150 % 60 s
tan <=1.0 %(20 ˚C, 1 kHz)
C<=0.33 µF
16 VDC : IR=>3000 M· (20 ˚C,10 VDC, 60 s)
50 VDC : IR=>3000 M· (20 ˚C,50 VDC, 60 s)
100 VDC, 250 VDC : IR=>3000 M· (20 ˚C,100 VDC, 60 s)
C>0.33 µF
16 VDC : IR=>1000 M· µF (20 ˚C,10 VDC, 60 s)
100 VDC : IR=>1000 M· µF (20 ˚C,100 VDC, 60 s)
Soldering conditions
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max. product.)
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage.
Please consult us for capacitance range between 0.15 µF and 1.0 µF for 250 VDC type.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Free Datasheet http://www.datasheet4u.com/

PagesPages 3
Télécharger [ ECWU1H104JC9 ]


Fiche technique recommandé

No Description détaillée Fabricant
ECWU1H104JC9 Stacked Metallized PEN Film Chip Capacitor Panasonic
Panasonic

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche