DataSheetWiki

P6SMB220A Datasheet دیتاشیت PDF دانلود

دیتاشیت - Fuji Electric - 600 Watts Surface Mount Transient Voltage Suppressor

شماره قطعه P6SMB220A
شرح مفصل 600 Watts Surface Mount Transient Voltage Suppressor
تولید کننده Fuji Electric 
آرم Fuji Electric 


1 Page

		

No Preview Available !

P6SMB220A شرح
www.DataSheet4U.com
P6SMB SERIES
600 Watts Surface Mount
Transient Voltage Suppressor
SMB/DO-214AA
Features
.083(2.10)
.077(1.95)
.147(3.73)
.137(3.48)
For surface mounted application in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10
x 1000 us waveform by 0.01% duty cycle
.103(2.61)
.078(1.99)
.056(1.41)
.035(0.90)
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
.008(.20)
.004(.10)
.209(5.30)
.201(5.10)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA STD
RS-481)
Weight: 0.093gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25oC, Tp=1ms(Note 1)
Steady State Power Dissipation
PPK Minimum 600
Pd 3
Watts
Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
100
Amps
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
VF
3.5/5.0
Volts
Typical Thermal Resistance (Note 5)
RθJC
RθJA
10
55
oC/W
Operating and Storage Temperature Range
TJ, TSTG
-65 to + 150
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal.
oC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.
4. VF=3.5V on P6SMB6.8 thru P6SMB91 Devices and VF=5.0V on P6SMB100 thru P6SMB220 Devices.
5. Measured on P.C.B. with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types P6SMB6.8 through Types P6SMB220A.
2. Electrical Characteristics Apply in Both Directions.
Version: A06

قانون اساسیصفحه 4
دانلود [ P6SMB220A دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
P6SMB220 Surface Mount Transient Voltage Suppressor Taiwan Semiconductor Company
Taiwan Semiconductor Company
P6SMB220 600 Watts Surface Mount Transient Voltage Suppressor Fuji Electric
Fuji Electric
P6SMB220 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pan Jit International
Pan Jit International
P6SMB220A Glass Passivated Junction Transient Voltage Suppressor Luguang Electronic
Luguang Electronic

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2018   |   تماس با ما  |   جستجو