DataSheetWiki


P6SMB100A fiches techniques PDF

Vishay Siliconix - Surface Mount TRANSZORB Transient Voltage Suppressors

Numéro de référence P6SMB100A
Description Surface Mount TRANSZORB Transient Voltage Suppressors
Fabricant Vishay Siliconix 
Logo Vishay Siliconix 





1 Page

No Preview Available !





P6SMB100A fiche technique
P6SMB Series
Vishay General Semiconductor
Surfacewww.DataSheet4U.com Mount TRANSZORB® Transient Voltage Suppressors
DO-214AA (SMB)
PRIMARY CHARACTERISTICS
VBR uni-directional
VBR bi-directional
PPPM
PD
IFSM (uni-directional only)
TJ max.
6.8 V to 540 V
6.8 V to 220 V
600 W
5.0 W
100 A
150 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g.
P6SMB10CA).
Electrical characteristics apply in both directions.
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of
sensor units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1)
Power dissipation on infinite heatsink TA = 50 °C ,
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
SYMBOL
PPPM
IPPM
PD
IFSM
TJ, TSTG
VALUE
600
See next table
5.0
100
- 65 to + 150
UNIT
W
A
W
A
°C
Document Number: 88370 For technical questions within your region, please contact one of the following:
Revision: 21-Oct-08
www.vishay.com
1

PagesPages 5
Télécharger [ P6SMB100A ]


Fiche technique recommandé

No Description détaillée Fabricant
P6SMB100 Surface Mount Transient Voltage Suppressor Taiwan Semiconductor Company
Taiwan Semiconductor Company
P6SMB100 600 Watts Surface Mount Transient Voltage Suppressor Fuji Electric
Fuji Electric
P6SMB100 TVS Diode, SMD (Transient Voltage Suppressor) Pan Jit International
Pan Jit International
P6SMB100A UNI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS/ 6.8 THRU 200 VOLTS Central Semiconductor Corp
Central Semiconductor Corp

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche