DataSheetWiki


P6SMB100A fiches techniques PDF

Taiwan Semiconductor Company - Surface Mount Transient Voltage Suppressor

Numéro de référence P6SMB100A
Description Surface Mount Transient Voltage Suppressor
Fabricant Taiwan Semiconductor Company 
Logo Taiwan Semiconductor Company 





1 Page

No Preview Available !





P6SMB100A fiche technique
www.DataSheet4U.com
P6SMB SERIES
Surface Mount Transient Voltage Suppressor
Voltage Range
6.8 to 200 Volts
600 Watts Peak Power
Features
SMB/DO-214AA
For surface mounted application in order to optimize board
space
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to
BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
250OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
600 watts peak pulse power capability with a 10 x 1000 us
waveform by 0.01% duty cycle
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA STD RS-481)
Weight: 0.093gram
.082(2.08)
.076(1.93)
.147(3.73)
.137(3.48)
.103(2.61)
.078(1.99)
.056(1.41)
.035(0.90)
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
.008(.20)
.004(.10)
.208(5.28)
.200(5.08)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC,
Tp=1ms(Note 1)
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
Maximum Instantaneous Forward Voltage at
50.0A for Unidirectional Only (Note 4)
Operating and Storage Temperature Range
Symbol
PPK
IFSM
VF
TJ, TSTG
Value
Minimum 600
100
3.5
-65 to + 150
Units
Watts
Amps
Volts
OC
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2.
2. Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute
Maximum.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types P6SMB6.8 through Types P6SMB200A.
2. Electrical Characteristics Apply in Both Directions.
- 620 -

PagesPages 4
Télécharger [ P6SMB100A ]


Fiche technique recommandé

No Description détaillée Fabricant
P6SMB100 Surface Mount Transient Voltage Suppressor Taiwan Semiconductor Company
Taiwan Semiconductor Company
P6SMB100 600 Watts Surface Mount Transient Voltage Suppressor Fuji Electric
Fuji Electric
P6SMB100 TVS Diode, SMD (Transient Voltage Suppressor) Pan Jit International
Pan Jit International
P6SMB100A UNI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS/ 6.8 THRU 200 VOLTS Central Semiconductor Corp
Central Semiconductor Corp

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche