DataSheetWiki


ACPM-5202 fiches techniques PDF

AVAGO - Power Amplifier Module

Numéro de référence ACPM-5202
Description Power Amplifier Module
Fabricant AVAGO 
Logo AVAGO 





1 Page

No Preview Available !





ACPM-5202 fiche technique
ACPM-5202
UMTS Band2 (1850-1910MHz) 3x3mm Power Amplifier Module
Data Sheet
Description
The ACPM-5202 is a fully matched 10-pin surface mount
module developed for UMTS Band2. This power amplifier
module operates in the 1850-1910MHz bandwidth. The
ACPM-5202 meets stringent UMTS linearity requirements
up to 28dBm output power (Rel99). The 3mmx3mm form
factor package is self contained, incorporating 50ohm
input and output matching networks. The PA also contains
internal DC blocking capacitors for RF input and output
ports.
The ACPM-5202 features 5th generation of CoolPAM
(CoolPAM5) circuit technology which supports 3 power
modes – active bypass, mid power and high power modes.
The CoolPAM is stage bypass technology enhancing
PAE (power added efficiency) at low and medium power
range. The active bypass feature is added to CoolPAM5 to
enhance the PAE further at low output range and it enables
the PA to have exceptionally low quiescent current. It dra-
matically saves the average power consumption and ac-
cordingly extends the talk time of mobiles and prolongs
a battery life.
A directional coupler is integrated into the module and
both coupling and isolation ports are available exter-
nally, supporting daisy chain. The integrated coupler
has excellent coupler directivity, which minimizes the
coupled output power variation or delivered power
variation caused by the load mismatch from the antenna.
The coupler directivity, or the output power variation into
the mismatched load, is critical to the TRP and SAR per-
formance of the mobile phones in real field operations as
well as compliance tests for the system specifications.
The ACPM-5202 has integrated on-chip Vref and on-module
bias switch as the one of the key features of the CoolPAM-
5, so an external constant voltage source is not required,
eliminating the external LDO regulators and switches
from circuit boards of mobile devices. It also makes the PA
fully digital-controllable by the Ven pin that simply turns
Features
Thin Package (1.0mm typ)
Excellent Linearity
3-mode power control with Vbp and Vmode
– Bypass / Mid Power Mode / High Power Mode
High Efficiency at max output power
10-pin surface mounting package
Internal 50ohm matching networks for both RF input
and output
Integrated coupler
– Coupler and Isolation ports for daisy chain
Green (Lead-free and RoHS compliant)
Applications
UMTS Band2
Ordering Information
Part Number
ACPM-5202-TR1
ACPM-5202-BLK
Number of Devices
1000
100
Container
178mm (7”)
Tape/Reel
Bulk
Description (Cont.)
the PA on and off from the digital control logic input from
baseband chipsets. All of the digital control input pins
such as the Ven, Vmode and Vbp are fully CMOS compat-
ible and can operate down to the 1.35V logic. The current
consumption by digital control pins is negligible.
The power amplifier is manufactured on an advanced
InGaP HBT (hetero-junction Bipolar Transistor) MMIC
(microwave monolithic integrated circuit) technology
offering state-of-the-art reliability, temperature stability
and ruggedness.
Free Datasheet http://www.datasheet4u.com/

PagesPages 13
Télécharger [ ACPM-5202 ]


Fiche technique recommandé

No Description détaillée Fabricant
ACPM-5201 Power Amplifier Module AVAGO
AVAGO
ACPM-5202 Power Amplifier Module AVAGO
AVAGO
ACPM-5204 Power Amplifier Module AVAGO
AVAGO
ACPM-5205 Power Amplifier Module AVAGO
AVAGO

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche