|
|
Número de pieza | HMC7447 | |
Descripción | E-BAND DETECTOR | |
Fabricantes | Hittite | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC7447 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! v00.0913
HMC7447
E-BAND DETECTOR
71 - 86 GHz
Typical Applications
The HMC7447 monitors Tx Output Power for:
• E-Band Communications Systems
• Test Equipment & Sensors
• General Purpose RF Power Detection
Functional Diagram
Features
Frequency: 71 - 86 GHz
Input Power Range: -0.5 to +23.5 dBm
Dynamic Range: 24 dB
Insertion Loss: 0.45 dB
I/Os Matched to 50 Ohms
Die Size: 0.87 x 1.22 x 0.1 mm
General Description
The HMC7447 is a high performance E-Band MMIC
power detector designed to operate over the 71 to 86
GHz frequency range. The power detector provides a
linear output voltage over a -0.5 to +23.5 dBm input
power range with low insertion loss of 0.45 dB and
typical input return loss of only 19.5 dB. Ideal for
monitoring transmitter operation or enabling closed-
loop transmitter output power, the detector exhibits
excellent sensitivity and flat frequency response of
+/- 0.2 dB over the 71 to 76 GHz band and the 81
to 86 GHz band. The HMC7447 power detector also
provides excellent repeatabillity and performance over
varying temperature and output load variations. It may
be interfaced to an op-amp circuit to achieve a slope of
20 mV/dB at the minimum detector input power level.
All data is taken with the chip in a 50 Ohm test fixture
connected via a 0.025 mm (1mil) diameter double wire
bonds of 0.2 mm (8 mils) maximum length.
Electrical Specifications, TA = +25°C
Parameter
Frequency Range
Input Power Range
Dynamic Range
Insertion Loss
Output Voltage
Minimum Sensitivity [1]
Input Return Loss
Output Return loss
Detector Output Flatness Across Frequency [2]
[1] After external OpAmp of Gain = 6dB.
[2] Typical flatness 0.2 dB (71 - 76) GHz and 0.2 dB (81 - 86)GHz.
Min.
-0.5
0.048
20
Typ.
71 - 86
24
0.45
19.5
22
0.2
Max.
23.5
1.45
Units
GHz
dBm
dB
dB
V
mV/dB
dB
dB
dB
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Free Datasheet http://www.datasheet4u.com/
1 page v00.0913
HMC7447
E-BAND DETECTOR
71 - 86 GHz
Pin Descriptions
Pad Number
Function
1 RF IN
2 RF OUT
3 Vdet
4 Vref
Description
These ports are matched to 50 Ohms.
DC voltage representing RF output power rectified by
diode which is biased through an external resistor. See
application circuit.
DC voltage of diode biased through external resistor used
for temperature compensation of Vdet. See application
circuit.
Pad Schematic
Die Bottom
GND
Die bottom must be connected to RF/DC ground.
Assembly Diagram
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Free Datasheet http://www.datasheet4u.com/
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet HMC7447.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC7441 | GaAs pHEMT MMIC 2 WATT POWER AMPLIFIER | Hittite |
HMC7447 | E-BAND DETECTOR | Hittite |
HMC744LC3 | FAST RISE TIME 1:2 FANOUT BUFFER | Hittite |
HMC744LC3C | 13 Gbps Fast Rise Time 1:2 Fanout Buffer W/Programmable Output Voltage | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |