DataSheetWiki


ADC8494 fiches techniques PDF

Analog Devices - (ADC8494 - ADC8497) Precision Thermocouple Amplifiers

Numéro de référence ADC8494
Description (ADC8494 - ADC8497) Precision Thermocouple Amplifiers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADC8494 fiche technique
Precision Thermocouple Amplifiers
with Cold Junction Compensation
AD8494/AD8495/AD8496/AD8497
FEATURES
Low cost and easy to use
Pretrimmed for J or K type thermocouples
Internal cold junction compensation
High impedance differential input
Standalone 5 mV/°C thermometer
Reference pin allows offset adjustment
Thermocouple break detection
Laser wafer trimmed to 1°C initial accuracy and
0.025°C/°C ambient temperature rejection
Low power: <1 mW at VS = 5 V
Wide power supply range
Single supply: 2.7 V to 36 V
Dual supply: ±2.7 V to ±18 V
Small, 8-lead MSOP
APPLICATIONS
J or K type thermocouple temperature measurement
Setpoint controller
Celsius thermometer
Universal cold junction compensator
White goods (oven, stove top) temperature measurements
Exhaust gas temperature sensing
Catalytic converter temperature sensing
GENERAL DESCRIPTION
The AD8494/AD8495/AD8496/AD8497 are precision
instrumentation amplifiers with thermocouple cold junction
compensators on an integrated circuit. They produce a high
level (5 mV/°C) output directly from a thermocouple signal by
combining an ice point reference with a precalibrated amplifier.
They can be used as standalone thermometers or as switched
output setpoint controllers using either a fixed or remote
setpoint control.
The AD8494/AD8495/AD8496/AD8497 can be powered from a
single-ended supply (less than 3 V) and can measure temperatures
below 0°C by offsetting the reference input. To minimize self-
heating, an unloaded AD849x typically operates with a total
supply current of 180 μA, but it is also capable of delivering in
excess of ±5 mA to a load.
The AD8494 and AD8496 are precalibrated by laser wafer
trimming to match the characteristics of J type (iron-constantan)
thermocouples; the AD8495 and AD8497 are laser trimmed to
match the characteristics of K type (chromel-alumel) thermo-
couples. See Table 1 for the optimized ambient temperature
range of each part.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
FUNCTIONAL BLOCK DIAGRAM
REF
+IN ESD AND
OVP
AD8494/AD8495/
AD8496/AD8497
A2
THERMO-
COUPLE
COLD JUNCTION
COMPENSATION
A3
–IN
1M
ESD AND
OVP
A1
Figure 1.
SENSE
OUT
Table 1. Device Temperature Ranges
Thermo-
Optimized Temperature Range
Couple Ambient Temperature Measurement
Part No. Type
(Reference Junction) Junction
AD8494 J
0°C to 50°C
Full J type range
AD8495 K
0°C to 50°C
Full K type range
AD8496 J
25°C to 100°C
Full J type range
AD8497 K
25°C to 100°C
Full K type range
The AD8494/AD8495/AD8496/AD8497 allow a wide variety of
supply voltages. With a 5 V single supply, the 5 mV/°C output
allows the devices to cover nearly 1000 degrees of a thermo-
couple’s temperature range.
The AD8494/AD8495/AD8496/AD8497 work with 3 V supplies,
allowing them to interface directly to lower supply ADCs. They
can also work with supplies as large as 36 V in industrial systems
that require a wide common-mode input range.
PRODUCT HIGHLIGHTS
1. Complete, precision laser wafer trimmed thermocouple
signal conditioning system in a single IC package.
2. Flexible pinout provides for operation as a setpoint
controller or as a standalone Celsius thermometer.
3. Rugged inputs withstand 4 kV ESD and provide over-
voltage protection (OVP) up to VS ± 25 V.
4. Differential inputs reject common-mode noise on the
thermocouple leads.
5. Reference pin voltage can be offset to measure 0°C on
single supplies.
6. Available in a small, 8-lead MSOP that is fully RoHS compliant.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2010–2011 Analog Devices, Inc. All rights reserved.
Free Datasheet http://www.datasheet4u.com/

PagesPages 16
Télécharger [ ADC8494 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADC8494 (ADC8494 - ADC8497) Precision Thermocouple Amplifiers Analog Devices
Analog Devices
ADC8495 (ADC8494 - ADC8497) Precision Thermocouple Amplifiers Analog Devices
Analog Devices
ADC8496 (ADC8494 - ADC8497) Precision Thermocouple Amplifiers Analog Devices
Analog Devices
ADC8497 (ADC8494 - ADC8497) Precision Thermocouple Amplifiers Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche