|
|
PDF HMC6187LP4E Data sheet ( Hoja de datos )
| Número de pieza | HMC6187LP4E | |
| Descripción | VARIABLE GAIN AMPLIFIER | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC6187LP4E (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
v00.0312
Typical Applications
The HMC6187LP4E is ideal for:
• Point-to-Point Radio
• Point-to-Multi-Point Radio
• EW & ECM Subsystems
• Ka-Band Radar & VSAT
• Test Equipment
Functional Diagram
HMC6187LP4E
VARIABLE GAIN AMPLIFIER
27 - 31.5 GHz
Features
Wide Gain Control Range: 13 dB
Single Control Voltage
Output IP3 @ Max Gain: +31 dBm
Output P1dB: +24 dBm
No External Matching
24 Lead 4x4 mm SMT Package: 16 mm2
General Description
The HMC6187LP4E is a GaAs MMIC pHEMT analog
variable gain amplifier and/or driver amplifier which
operates between 27 and 31.5 GHz and is ideal for
microwave radio applications. The amplifier provides
up to 19 dB of gain, output P1dB of up to +24 dBm,
and up to +31 dBm of output IP3 at maximum gain,
while requiring 230 mA from a +5V supply. A gain
control voltage (Vctrl) is provided to allow variable
gain control up to 13 dB. Gain flatness is excellent
making the HMC6187LP4E ideal for EW, ECM and
radar applications. The HMC6187LP4E is housed in
a RoHS compliant 4 x 4 mm plastic QFN leadless
package and is compatible with high volume surface
mount manufacturing.
Electrical Specifications, TA = +25°C, Vdd1, 2, 3, 4 = 5V, Vctrl= -4.5V, Idd = 230 mA[1]
Parameter
Min. Typ.
Frequency Range
27 - 31.5
Gain [2]
16 19
Gain Flatness
±0.5
Gain Variation Over Temperature
0.02
Gain Control Range
13
Noise Figure [2]
4.5
Input Return Loss
12
Output Return Loss
15
Output Power for 1 dB Compression (P1dB) [2]
21
24
Saturated Output Power (Psat) [2]
25
Output Third Order Intercept (IP3) [2]
31
Total Supply Current (Idd)
230
[1]Set Vctrl = -4.5V and then adjust Vgg1, 2 between -2V to 0V to achieve Idd = 230 mA typical.
[2] Board loss subtracted out.
Max.
Units
GHz
dB
dB
dB/ °C
dB
dB
dB
dB
dBm
dBm
dBm
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Free Datasheet http://www.datasheet4u.com/
1 page  
v00.0312
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, 2, 3)
Gate Bias Voltage (Vgg1, 2)
Gain Control Voltage (Vctrl)
RF Power Input (RFIN)
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 20.3 mW/°C above 85 °C) [1]
Thermal Resistance
(Channel to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+5.5V
-2.5 to 0V
-5 to 0V
+5 dBm
175 °C
1.83 W
49.2 °C/W
-65 to +150 °C
-40 to +85 °C
Class 0 Passed 100V
Outline Drawing
HMC6187LP4E
VARIABLE GAIN AMPLIFIER
27 - 31.5 GHz
Bias Voltage
Vdd1,2,3 (V)
+5V
Vgg1,2 (V)
0V to -2V
Vctrl (V)
-4.5V to -1V
Idd Total (mA)
230
Igg Total (mA)
<0.2 mA
Ictrl (mA)
<1 mA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED LAND PATTERN.
Part Number
Package Body Material
HMC6187LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Lead Finish
100% matte Sn
MSL Rating
MSL1 [1]
Package Marking [2]
H6187
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC6187LP4E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC6187LP4E | VARIABLE GAIN AMPLIFIER | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |