|
|
PDF NTAG213F Data sheet ( Hoja de datos )
| Número de pieza | NTAG213F | |
| Descripción | (NTAG213F / NTAG216F) NFC Forum Type 2 Tag compliant IC | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTAG213F (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
NTAG213F/216F
NFC Forum Type 2 Tag compliant IC with 144/888 bytes user
memory and field detection
Rev. 3.0 — 18 July 2013
262230
Product data sheet
COMPANY PUBLIC
1. General description
The NTAG213F and NTAG216F are the new NFC forum compliant Type 2 tag products
developed by NXP Semiconductors for applications in electronics (i.e. connection
handover, Bluetooth simple pairing, Wi-Fi Protected set-up, device authentication, gaming
and others) - see Figure 1.
On top of offering a large range of User memory (144bytes for NTAG213F and 888bytes
for NTAG216F), the NTAG21xFproduct family offers innovative functionalities like
configuration of the field detection, the SLEEP mode, the FAST_READ command and a
configurable password protection.
The NTAG21xF product family is designed to fully comply to NFC Forum Type 2 Tag
(Ref. 2) and ISO/IEC14443 Type A (Ref. 1) specifications.
The NTAG21xF product family also offers the same package (HXSON4), the same input
capacitance and a full pinning compatibility to the NTAG203F product.
1.1 Contactless energy and data transfer
Communication to NTAG21xF can be established only when the IC is connected to an
antenna. Form and specification of the antenna is out of scope of this document.
When NTAG21xF is positioned in the RF field, the high speed RF communication
interface allows the transmission of the data with a baud rate of 106 kbit/s.
e.g.
µC,
POWER
CONTROL
UNIT
NTAG IC
NFC TAG
ENERGY
DATA
NFC
ENABLED DEVICE
Fig 1. Contactless system
aaa-001749
Free Datasheet http://www.datasheet4u.com/
1 page  
NXP Semiconductors
NTAG213F/216F
NFC Forum T2T IC with 144/888 bytes user memory and field detection
4. Ordering information
Table 1. Ordering information
Type number
Package
Name
Description
NT2H1611F0DTL HXSON4
Plastic leadless module carrier package; 35 mm wide tape
888 bytes user memory, 50pF input capacitance
NT2H1311F0DTL HXSON4
Plastic leadless module carrier package; 35 mm wide tape
144 bytes user memory, 50pF input capacitance
5. Block diagram
Version
-
-
DIGITAL CONTROL UNIT
antenna
RF INTERFACE
ANTICOLLISION
FIELD
DETECTION
COMMAND
INTERPRETER
EEPROM
INTERFACE
Fig 3. Block diagram of NTAG213F/216F
EEPROM
aaa-001748
NTAG213F_216F
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.0 — 18 July 2013
262230
© NXP B.V. 2013. All rights reserved.
5 of 56
5 Page 
NXP Semiconductors
NTAG213F/216F
NFC Forum T2T IC with 144/888 bytes user memory and field detection
8.4.4 ACTIVE state
All memory operations and other functions like the originality check are operated in the
ACTIVE state.
The ACTIVE state is exited with the HLTA command and upon reception NTAG21xF
transits to the HALT state. Any other data received when the device is in this state is
interpreted as an error. Depending on its previous state NTAG21xF returns to either the
IDLE state or HALT state.
NTAG21xF transits to the AUTHENTICATED state after successful password verification
using the PWD_AUTH command.
8.4.5 AUTHENTICATED state
In this state, all memory operations as well as all operations on memory pages, which are
configured as password verification protected, can be accessed.
The AUTHENTICATED state is exited with the HLTA command and upon reception
NTAG21xF transits to the HALT state. Any other data received when the device is in this
state is interpreted as an error. Depending on its previous state NTAG21xF returns to
either the IDLE state or HALT state.
8.4.6 HALT state
HALT and IDLE states constitute the two wait states implemented in NTAG21xF. An
already processed NTAG21xF can be set into the HALT state using the HLTA command.
In the anticollision phase, this state helps the NFC device to distinguish between
processed tags and tags yet to be selected. NTAG21xF can only exit this state on
execution of the WUPA command. Any other data received when the device is in this state
is interpreted as an error and NTAG21xF state remains unchanged.
NTAG213F_216F
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.0 — 18 July 2013
262230
© NXP B.V. 2013. All rights reserved.
11 of 56
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet NTAG213F.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTAG213F | (NTAG213F / NTAG216F) NFC Forum Type 2 Tag compliant IC | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |