DataSheetWiki


ADP1196 fiches techniques PDF

Analog Devices - High-Side or Low-Side Load Switch

Numéro de référence ADP1196
Description High-Side or Low-Side Load Switch
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP1196 fiche technique
Data Sheet
5 V, 3 A Logic Controlled
High-Side or Low-Side Load Switch
ADP1196
FEATURES
Low RDSON of 10 mΩ in 6-ball WLCSP
Wide input voltage range: 0 V to 5.5 V
3 A continuous operating current at 70°C
Bias supply voltage range: 1.83 V to 5.5 V
Low 26 µA ground (quiescent) current, VIN ≤ 3.4 V
Low 50 µA quiescent current, VIN = 5.5 V
Overtemperature protection circuitry
Low shutdown current: <3.5 µA
Ultrasmall 1.0 mm × 1.5 mm, 6-ball, 0.5 mm pitch WLCSP
APPLICATIONS
Communications and infrastructure
Thermoelectric cooler (TEC) controller reverse polarity
for heating and cooling
Fine line geometry core voltage inrush current control
Medical and healthcare
Instrumentation
GENERAL DESCRIPTION
The ADP1196 is a high-side or low-side load switch designed for
VIN operation between 0 V and 5.5 V with a VB_EN supply of
1.83 V to 5.5 V. The device contains an internal charge pump that
operates from either VIN or VB_EN, whichever is higher, and
an ultralow on resistance, N-channel MOSFET. This N-channel
MOSFET supports more than 2 A of continuous current at VIN
close to 0 V, and, with its ultralow on resistance, minimizes power
loss. In addition, the on resistance is constant, independent of the
VIN or VB_EN voltage. The low 26 µA quiescent current and
ultralow shutdown current make the ADP1196 ideal for low
power applications.
TYPICAL APPLICATIONS CIRCUITS
VIN VOUT
VIN VOUT
+
ADP1196
VB_EN
LOAD
+
GND
Figure 1. Low-Side Load Application
VIN VOUT
VIN VOUT
LOAD
ADP1196
VB_EN
++
––
GND
Figure 2. High-Side Load Application
When the junction temperature exceeds 125°C, overtemperature
http://www.DataSheet4U.com/ protection circuitry is activated, thereby protecting the ADP1196
and downstream circuits from potential damage.
The ADP1196 occupies minimal printed circuit board (PCB)
space, with an area of less than 1.5 mm2 and a height of 0.60 mm.
The ADP1196 is available in an ultrasmall 1.0 mm × 1.5 mm,
6-ball, 0.5 mm pitch WLCSP.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 12
Télécharger [ ADP1196 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP1190 Integrated 500 mA Load Switch Analog Devices
Analog Devices
ADP1190A Integrated 500 mA Load Switch Analog Devices
Analog Devices
ADP1191 PRECISION SEMICONDUCTOR PRESSURE SENSOR ETC
ETC
ADP1196 High-Side or Low-Side Load Switch Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche