|
|
Número de pieza | AD8634 | |
Descripción | Low Power Operational Amplifier | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AD8634 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! Preliminary Technical Data
High Temperature, Low Power
Operational Amplifier
AD8634
FEATURES
Extreme high temperature operation
−40°C to +210°C, flatpack package
−40°C to +175°C, SOIC package
Rail-to-rail output
Low power: 1 mA maximum
Gain bandwidth product: 10 MHz at AV = 100 typical
Low offset voltage: 200 μV maximum
Unity-gain stable
High slew rate: 2.5 V/μs typical
Low noise: 4 nV/√Hz typical at 1 kHz
APPLICATIONS
Downhole drilling and instrumentation
Avionics
Heavy industrial
High temperature environments
GENERAL DESCRIPTION
The AD8634 is a single-supply, 10 MHz bandwidth, dual
amplifier that features rail-to-rail outputs. The AD8634 is
guaranteed to operate from 3 V to 30 V (or ±1.5 V to ±15 V)
and at very high temperatures.
The AD8634 is well suited for single-supply applications that
require both ac and precision dc performance. The combination
of wide bandwidth, low noise, and precision makes the AD8634
useful in a wide variety of applications, including filters and
interfacing with a variety of sensors.
This dual-channel op amp is offered in an 8-lead SOIC plastic
package with an operating temperature range of −40°C to +175°C.
It is also available in an 8-lead ceramic flat package (flatpack)
with an operating temperature range of −40°C to +210°C. Both
packages are designed for robustness at extreme temperatures
and are qualified for 1000 hours of operation at the maximum
temperature rating.
PIN CONFIGURATION
OUT A 1
–IN A 2
+IN A 3
V– 4
8 V+
7 OUT B
6 –IN B
5 +IN B
AD8634
TOP VIEW
(Not to Scale)
Figure 1. SOIC and Flatpack Pinout
The AD8634 is a member of a growing series of high temperature
qualified products offered by Analog Devices, Inc. For a complete
selection table of available high temperature products, see the
high temperature product list and qualification data available at
http://www.DataSheet4U.com/
www.analog.com/hightemp.
Rev. PrA
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page Preliminary Technical Data
AD8634
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage1
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
SOIC Package
Flatpack Package
Junction Temperature
SOIC Package
Flatpack Package
Lead Temperature (Soldering 60 sec)
Rating
±18 V
V− ≤ VIN ≤ V+
±0.6 V
TBD
−65°C to +210°C
−40°C to +175°C
−40°C to +210°C
210°C
210°C
300°C
1 For input differential voltages greater than 0.6 V, the input current should be
limited to less than 5 mA to prevent degradation or destruction of the input
devices.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the device soldered on a 4-layer JEDEC
standard printed circuit board (PCB) with zero airflow.
Table 4. Thermal Resistance
Package Type
θJA θJC Unit
8-Lead SOIC_N
121 43
°C/W
8-Lead Flatpack
TBD TBD °C/W
ESD CAUTION
http://www.DataSheet4U.com/
Rev. PrA | Page 5 of 7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet AD8634.PDF ] |
Número de pieza | Descripción | Fabricantes |
AD8630 | Rail-to-Rail Input/Output Operational Amplifier | Analog Devices |
AD8631 | 1.8 V/ 5 MHz Rail-to-Rail Low Power Operational Amplifiers | Analog Devices |
AD8632 | 1.8 V/ 5 MHz Rail-to-Rail Low Power Operational Amplifiers | Analog Devices |
AD8634 | Low Power Operational Amplifier | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |