|
|
PDF SF2024D-1 Data sheet ( Hoja de datos )
| Número de pieza | SF2024D-1 | |
| Descripción | SAW Filter | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF2024D-1 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
® SF2024D-1
• Designed for SDARS Receiver IF Application
• Low Insertion Loss
• 3.8 X 3.8 X 1.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
467.751 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SM3838-8
Electrical Characteristics
Center Frequency
Characteristic
Insertion Loss
Amplitude Ripple (p-p)
fc-6.250 to fc-4.3925 MHz
fc-4.3925 to fc-2.535 MHz
fc-2.5350 to fc-0.025 MHz
fc+0.025 to fc+2.535 MHz
fc+2.5350 to fc+4.3925 MHz
fc+4.3925 to fc+6.250 MHz
Pass bandwidth of -2.0dB centered at fc
Pass bandwidth of -3 dB
Low Side Attenuation between 455.751 to 457.251 MHz (fc-10.5 MHz)
Low Side Attenuation F<455.751 MHz
High Side Attenuation between 476.751 to 479.751 MHz (fc+9.0 MHz)
High Side Attenuation F>479.751 MHz
Temperature Coefficient of frequency
Delay Ripple (p-p)
fc-6.250 to fc-4.3925 MHz
fc-4.3925 to fc-2.535 MHz
fc-2.5350 to fc-0.025 MHz
fc+0.025 to fc+2.535 MHz
fc+2.5350 to fc+4.3925 MHz
fc+4.3925 to fc+6.250 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Operating Temperature
Sym
fC
IL
www.DataSheet.net/
ZS
ZL
Notes
1
1, 2
1, 2, 3
6
Min
467.704
Typ
467.751
13
0.7
0.8
0.9
1.1
1.1
1.2
13.0
Max
467.798
15.5
2.0
2.0
2.0
2.0
2.0
2.0
Units
MHz
dB
dB
MHz
32
32
dB
20
32
-18 ppm/K
70 110
70 140
75 120
ns
80 120
80 100
85 140
150 Ω
150 Ω
SM3838-8 3.8 x 3.8 mm Nominal Footprint
619 YWWS
-40 +85 °C
Notes:
1. Unless noted otherwise, all specifications apply over the operating
temperature range with filter soldered to the specified demonstration
board with impedance matching to 50 Ω and measured with 50 Ω
network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced
to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in
the passband. Rejection in final user application is dependent on
PCB layout and external impedance matching design. See Applica-
tion Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter
are subject to change.
5. Tape and Reel Standard Per ANSI / EIA 481.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered
trademarks of RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2024D-1-1/29/08 Ver 0.1
Page 1 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
467.751 MHz
Tape and Reel Specifications
SAW Filter
See Detail "A"
“B “
Nominal Size
Inches millimeters
7 178
13 330
Quantity Per Reel
500
3000
12.0
2.0
COMPONENT ORIENTATION and DIMENSIONS
www.DataSheet.net/
Carrier Tape Dimensions
Ao
Bo
Ko
Pitch
W
0.3 ± 0.05
2.0 4.0
PIN #1
1.50 A
RO.3
(MAX.)
Bo
Ko
SECTION A-A
B
Ao
B
Pitch
A
R0.5
(MAX.)
1.5
SECTION B-B
USER DIRECTION OF FEED
4.25 mm
4.25 mm
1.30 mm
8.0 mm
12.0 mm
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2024D-1-1/29/08 Ver 0.1
Page 5 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SF2024D-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF2024D-1 | SAW Filter | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |