DataSheetWiki


RF3600E fiches techniques PDF

RF Monolithics - SAW Filter

Numéro de référence RF3600E
Description SAW Filter
Fabricant RF Monolithics 
Logo RF Monolithics 





1 Page

No Preview Available !





RF3600E fiche technique
• Ideal Front-End Filter for European Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Complies with Directive 2002/95/EC (RoHS) Pb
RF3600E
868.60 MHz
SAW Filter
The RF3600E is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to pro-
vide front-end selectivity in 868.6 MHz receivers. Receiver designs using this filter include superheterodyne
with 10.7 MHz or lower intermediate frequencies, plus direct conversion and superregeneratives. Typical
applications of these receivers are wireless remote-control and security devices operating in Europe under
ETSI I-ETS 300 220.
SM3030-8 Case
3.0 x 3.0
Characteristic
Center Frequency @ 25°C
Insertion Loss
3 dB Bandwidth
Passband Ripple, 868 to 870 MHz
Attenuation:
(relative to ILMIN)
Temperature
10 to 800 MHz
800 to 858 MHz
858 to 862 MHz
862 to 864 MHz
872 to 876 MHz
876 to 888 MHz
888 to 890 MHz
902 to 1000 MHz
Freq. Temp. Coefficient
Frequency Aging
Absolute Value during the First Year
Impedance @ fC
Input ZIN = RIN || CIN
Output ZOUT = ROUT || COUT
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
Sym
fC
IL
BW3
Notes
1, 2, 3
1, 3
1, 2, 3
www.DataSheet.net/
1, 3
FTC
|fA|
ZIN
ZOUT
3, 4
5
1
9
Minimum
47
32
25
17
19
15
32
35
Typical
Maximum
868.60
1.8
1600
2.3
2100
0.8 1.5
50
35
28
20
22
18
35
38
0.032
<±10
4.7 K|| 1.57 pF
3.8 K|| 1.74 pF
816 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
dB
kHz
dBP-P
dB
ppm/°C2
ppm/yr
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system with VSWR 1.2:1. The
test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and bandwidth and passband shape are dependent on
the impedance matching component values and quality.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range of -40 to 90°C.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may be calculated from:
f = fo [1 - FTC (To - Tc)2].
5. Frequency aging is the change in fc with time and is specified at +65 °C or less. Aging may exceed the specification for prolonged temperatures above +65 °C. Typically,
aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
9. Tape and Reel Standard for ANSI / EIA 481.
www.RFM.com E-mail: [email protected]
©2009 by RF Monolithics, Inc.
Page 1 of 2
RF3600E - 10/21/09
Datasheet pdf - http://www.DataSheet4U.co.kr/

PagesPages 2
Télécharger [ RF3600E ]


Fiche technique recommandé

No Description détaillée Fabricant
RF3600E SAW Filter RF Monolithics
RF Monolithics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche