|
|
Número de pieza | SF2086C | |
Descripción | SAW Filter | |
Fabricantes | RF Monolithics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF2086C (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! • 240 MHz SAW Filter
• 5.0 X 5.0 mm Surface-mount Case
• Single-ended Input and Output
• Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Maximum DC Voltage on any Non-ground Terminal
Storage Temperature Range in Tape and Reel
Suitable for Lead-free Soldering - Maximum Soldering Temperature
Value
Units
+13 dBm
30 VDC
-40 to +85
°C
260 °C for 30 s
SF2086C
240.00 MHz
SAW Filter
Electrical Characteristics
Characteristic
Nominal Center Frequency
Insertion Loss
2 dB Bandwidth
Amplitude Ripple, fC±15 MHz
Amplitude Ripple, fC±15 MHz, within adjacent 5 MHz windows
Group Delay Deviation, fC±15 MHz
Group Delay Deviation, fC±15 MHz, within adjacent 5 MHz windows
VSWR at fC
40 dB Rejection Bandwidth
Operating Temperature Range
Case Style
Lid Symbolization (Y=year, WW=week, S=shift)
Electrical Connections
Connection
Port 1
Input
Port 2
Output
Ground
Dot indicates Pin 1
Terminals
1
5
All others
SM5050-8
Sym
fC
BW2.0
www.DataSheet.net/
Notes
1
1
1
1
1
1
1
1
1, 2
Min Typ Max
240.00
13
30
2
1.5
100 180
75
2.5:1
65
-40 85
SM5050-8 5 x 5 mm Nominal Footprint
RFM 588 YWWS
Units
MHz
dB
MHz
dBP-P
dBP-P
nsP-P
nsP-P
MHz
°C
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Tape and Reel Standard ANSI / EIA 481.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port
2, so that the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
www.RFM.com E-mail: [email protected]
©2009-2010 by RF Monolithics, Inc.
Page 1 of 5
SF2086C - 6/14/10
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page Tape and Reel Specifications
See Detail "A"
“B”
Nominal Size
Inches millimeters
7 178
13 330
Quantity Per Reel
500
3000
12.0
2.0
www.DataSheet.net/
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao
Bo
Ko
Pitch
W
5.3 mm
5.3 mm
2.0 mm
8.0 mm
12.0 mm
www.RFM.com E-mail: [email protected]
©2009-2010 by RF Monolithics, Inc.
PIN #1
USER DIRECTION OF FEED
Page 5 of 5
SF2086C - 6/14/10
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SF2086C.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF2086C | SAW Filter | RF Monolithics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |