|
|
Número de pieza | ADUX1001i | |
Descripción | Smart Linear Resonant Actuator Controller | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ADUX1001i (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Data Sheet
Smart Linear Resonant Actuator Controller
ADUX1001i
FEATURES
ARC enabled LRA automatic resonance detection and
magnitude control
Agile pattern generator enabling HD haptic effects
Fast start and sharp braking
PWM and I2C drive modes
Low latency response (LLR) drive mode
Compatible with Immersion TS3000 and Immersion TS4000
8-bit DAC with programmable, bidirectional output current
source capability
2-wire (I2C-compatible) 1.8 V serial interface
Short-circuit protection
Undervoltage protection
Pin-selectable I2C address feature
Available in a 5 × 3 array WLCSP package
APPLICATIONS
Haptics applications
Linear resonant actuators
Eccentric rotating mass actuators
Mobile phones
Portable media players
Portable navigation devices
Tablet PCs
GENERAL DESCRIPTION
The ADUX1001i is a high efficiency linear resonant actuator
(LRA) controller that uses the Analog Devices, Inc., proprie-
tary Actuator Response Control™ (ARC™) technology. The
ADUX1001i control algorithm detects LRA resonant fre
quency and provides closed-loop control of drive frequency
and magnitude, ensuring compelling, reliable, and repeatable
haptic effects for all portable, gaming, and handheld applications.
The ADUX1001i features an 8-bit digital-to-analog converter
(DAC) that has programmable, bi-directional output current
capability. The hardware shutdown mode ensures low power
operation over a full 2.3 V to 4.8 V supply range, making it
ideally suited for portable mobile device haptic applications.
The ADUX1001i is compatible with Immersion TS3000 and
Immersion TS4000 engines.
The ADUX1001i features three interface options ensuring that
the ADUX1001i can be used in existing haptic implementations
as well as in new low latency haptic implementations. The
operating modes of the controller are invoked by the ADUX1001i
using a PWM- and/or an I2C-compatible interface. The I2C
7-bit address for the ADUX1001i is programmable using two
www.DataSheet.net/
external pins.
FUNCTIONAL BLOCK DIAGRAM
AVDD
PVDD
SDA
SCL
PWM1
SHUTDOWN
PWM2
LLR
SD_POL
ADDR1
ADDR0
LDO
HAPTIC
REGISTERS
AND
PWM
DECODING
AGND
PATTERN
GENERATOR
OSCILLATOR
ARC™
RESONANCE
DETECTION
AND
MAGNITUDE
CONTROL
REF
8-BIT
iDAC
ADUX1001i
Figure 1.
PGND
DRV1
DRV2
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2012 Analog Devices, Inc. All rights reserved.
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet ADUX1001i.PDF ] |
Número de pieza | Descripción | Fabricantes |
ADUX1001i | Smart Linear Resonant Actuator Controller | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |