DataSheetWiki


PCD-25 fiches techniques PDF

Mean Well - 25W Single Output AC Dimmable LED Power Supply

Numéro de référence PCD-25
Description 25W Single Output AC Dimmable LED Power Supply
Fabricant Mean Well 
Logo Mean Well 





1 Page

No Preview Available !





PCD-25 fiche technique
25W Single Output AC Dimmable LED Power Supply
PCD-25 series
F 110
( for B type only)
( for B type only)
SELV IP30
Features :
AC phase-cut dimming
Work with leading edge and trailing edge TRIAC dimmers
115VAC or 230VAC models available
Built-in active PFC function
Constant current design
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully isolated plastic case
IP30 design
Class power unit, no FG
Class 2 power unit
Suitable for indoor LED lighting applications
100% full load burn-in test
Low cost
High reliability
3 years warranty
( for A type only)
( for PCD-25-350/700 )
( except PCD-25-350/700 )
( for B type only)
PCD-25-350 A A : With AC input 90~ 135VAC.
B : With AC input 180~ 295VAC.
SPECIFICATION
MODEL
PCD-25-350
PCD-25-700
PCD-25-1050
PCD-25-1400
RATED CURRENT
350mA
700mA
1050mA
1400mA
OPERATING VOLTAGE RANGE 40 ~ 58V
24 ~ 36V
16 ~ 24V
12 ~ 18V
CURRENT RANGE
0 ~ 350mA
0 ~ 700mA
0 ~ 1050mA
0 ~ 1400mA
CURRENT ACCURACY
OUTPUT
RATED POWER
5.0%
20.3W
25.2W
25.2W
25.2W
RIPPLE & NOISE (max.) Note.1 4.6Vp-p
NO LOAD OUTPUT VOLTAGE (max.) 63V
2.7Vp-p
50V
www.DataSheet.co.kr
2.2Vp-p
35V
2Vp-p
25V
SETUP TIME
1000ms / 230VAC 2000ms / 115VAC at full load
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(max.)
82%
0.6A/115VAC
40A/230VAC
0.3A/230VAC
81%
80.5%
80%
LEAKAGE CURRENT
<0.5mA / 240VAC
SHORT CIRCUIT
PROTECTION
OVER TEMPERATURE
Hiccup mode, recovers automatically after fault condition is removed.
95 10 (RTH1)
Protection type : Shut down o/p voltage, re-power on to recover
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
-30 ~ +60 (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.0-08(except for PCD-16-350, PCD-25-350, PCD-25-700), ENEC EN 613471,
EN61347-2-13(for B type only), IP30 approved ; design refer to UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
EMC EMISSION
Compliance to EN55015 (B type only), EN61000-3-2 Class C ; EN61000-3-3, FCC part 18 non-consumer equipment (A type only)
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A
MTBF
906.5Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
84*57*29.5mm (L*W*H)
PACKING
0.19Kg; 72pcs/14.7Kg/0.92CUFT
NOTE
1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
File Name:PCD-25-SPEC 2012-03-20
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 4
Télécharger [ PCD-25 ]


Fiche technique recommandé

No Description détaillée Fabricant
PCD-25 25W Single Output AC Dimmable LED Power Supply Mean Well
Mean Well

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche