DataSheet.es    


PDF M240UW01-V2 Data sheet ( Hoja de datos )

Número de pieza M240UW01-V2
Descripción LCD MODULE
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de M240UW01-V2 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! M240UW01-V2 Hoja de datos, Descripción, Manual

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
Gleichmann & Co. Electronics GmbH
Product Marketing Displays & Systems
Industriestr. 16, D- 76297 Stutensee
Tel :07249-910-0, Fax: 07249-910-559
http://www.msc-ge.com
M240UW01 V2
( ) Preliminary Specification
( V ) Final Specification
Module
Model Name
24.0” WUXGA Color TFT-LCD
M240UW01 V2
Customer
Date
Prepared by
Date
Louis Jung
Apr. 27, 2007
Approved by
Approved by
Note: This Specification is subject to change without
notice.
CC Chiu
Apr. 27, 2007
Desktop Display Business Group /
AU Optronics corporation
document version 1.1
1

1 page




M240UW01-V2 pdf
www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
M240UW01 V2
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL reflector edge.
Instead, press at the far ends of the CCFL Reflector edge softly. Otherwise the TFT
Module may be damaged.
10)At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure, do not twist nor bend the TFT
Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT Module from
outside. Otherwise the TFT Module may be damaged.
12)Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
14)The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
document version 1.1
5

5 Page





M240UW01-V2 arduino
www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
M240UW01 V2
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
4.1 TFT LCD Module
Item
Symbol
Logic/LCD Drive
VIN
Min
4.5
Max Unit
5.5 [Volt]
Conditions
Note 1,2
4.2 Backlight Unit
Item
CCFL Current
Symbol
ICFL
Min
2.0
Max
8.0
Unit
[mA] rms
Conditions
Note 1,2
4.3 Absolute Ratings of Environment
Item
Symbol
Operating Temperature
TOP
Operation Humidity
HOP
Storage Temperature
TST
Storage Humidity
HST
Min.
0
5
-20
5
Max.
+50
90
+60
90
Unit
[oC]
[%RH]
[oC]
[%RH]
Conditions
Note 3
Note 1: With in Ta (25)
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
Operating Range
document version 1.1
Storage Range
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet M240UW01-V2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
M240UW01-V0LCD MODULEAUO
AUO
M240UW01-V1LCD MODULEAUO
AUO
M240UW01-V2LCD MODULEAUO
AUO
M240UW01-V3LCD MODULEAUO
AUO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar