|
|
PDF D4SL-NSK10-LKx Data sheet ( Hoja de datos )
| Número de pieza | D4SL-NSK10-LKx | |
| Descripción | Guard Lock Safety-door Switch | |
| Fabricantes | Omron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de D4SL-NSK10-LKx (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key
D4SL-N / D4SL-NSK10-LK@
World's smallest Class 6-contact Guard Lock
Safety-door Switch
<Guard Lock Safety-door Switch D4SL-N>
• Wiring time is reduced with two types of wiring
methods capable of one-touch attachment and
removal.
• A wide variety of built-in switches can be used for
various devices.
(4-, 5-, and 6-contact models are available)
• Key holding force of 1,300 N.
• It is possible to change the key insertion point
without detaching the head.
• Significantly reduced solenoid current contributes
to the reduction of power supply cost.
<Slide Key D4SL-NSK10-LK@>
• Lockout Key to prevent workers from becoming
trapped inside the hazardous area.
• The vertical D4SL Guard Lock Safety-door Switch
can be easily mounted on 40 × 40 mm aluminum
frames.
• The plastic material makes the Slide Key suitable
for lightweight doors.
Be sure to read the “Safety Precautions”
on page 22.
Guard Lock Safety-door Switch
Terminal
Block Type Connector Type
www.DataSheet.co.kr
Slide Key
1Datasheet pdf - http://www.DataSheet4U.net/
1 page  
Operation Keys
Type
Horizontal mounting
Horizontal mounting
(Short)
Horizontal mounting
(Cushion rubber)
Vertical mounting
Vertical mounting
(Cushion rubber)
Adjustable
(Horizontal)
Connector Cables
Cable length
1m
3m
5m
Model
D4SL-NK1
D4SL-NK1S
D4SL-NK1G
D4SL-NK2
D4SL-NK2G
D4SL-NK3
Model
D4SL-CN1
D4SL-CN3
D4SL-CN5
www.DataSheet.co.kr
D4SL-N / D4SL-NSK10-LK@
5Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
D4SL-N / D4SL-NSK10-LK@
Characteristics
Degree of protection *1
IP67 (EN60947-5-1)
Durability *2
Mechanical
Electrical
1,000,000 operations min.
150,000 operations min. (1 A resistance at 125 VAC) *3
Operating speed
0.05 to 1 m/s
Operating frequency
5 operations minute max.
Direct opening force *4
60 N min. (EN60947-5-1)
Direct opening travel *4
15 mm min. (EN60947-5-1)
Holding force *5
1,300 N min.
Contact resistance
200 mΩ max.
Minimum applicable load *6
1 mA resistive load at 5 VDC (N-level reference value)
Rated insulation voltage (Ui)
150 V (EN60947-5-1)
Rated frequency
Protection against electric shock
50/60 Hz
Class II(double insulation)
Pollution degree (operating environment)
3 (EN60947-5-1)
Impulse
withstand voltage
(EN60947-5-1)
Between terminals of same polarity
Between terminals of different polarity
Between other terminals and
non-current carrying metallic parts
1.5 kV
1.5 kV
2.5 kV
Insulation resistance
100 Ω min. (at 500 VDC)
Vibration resistance Malfunction
10 to 55 Hz, 0.35 mm single amplitude
Shock resistance
Malfunction
Destruction
80 m/s2 min.
1,000 m/s2 min.
Conditional short-circuit current
100 A (EN60947-5-1)
Conventional free air thermal current (Ith)
2.5A (11-42, 21-52, 21-22)
1A (Others)
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient operations humidity
95% max.
Weight
Head: Resin
Approx. 290 g (Connector model)www.DataSheet.co.kr
Approx. 330 g (Terminal block model)
Head: Metal
Approx. 370 g (Connector model)
Approx. 410 g (Terminal block model)
Note: 1. The above values are initial values.
2. The Switch contacts can be used with either standard loads or microloads.
Once the contacts have been used to switch a load, however, they cannot be used to switch smaller loads.
The contact surfaces will become rough once they have been used and contact reliability for smaller loads may be reduced.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1).
Confirm that sealing properties are sufficient for the operating conditions and environment beforehand.
Although the switch box is protected from dust, oil or water penetration, do not use the D4SL in places where cutting chips, oil, water or
chemicals may enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details, consult your OMRON
representative.
*3. Do not pass the 1 A, 125 VAC load through more than 3 circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the GS-ET-19 evaluation method.
*6. This value will vary with the switching frequency, environment, and reliability level.
Confirm that correct operation is possible with the actual load beforehand.
11Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet D4SL-NSK10-LKx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D4SL-NSK10-LKx | Guard Lock Safety-door Switch | Omron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |