|
|
PDF SBR102P Data sheet ( Hoja de datos )
| Número de pieza | SBR102P | |
| Descripción | SENSOR | |
| Fabricantes | Sensor Switch | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SBR102P (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
®
SBR 10 2P
EXTENDED RANGE 360º SENSOR
EMBEDDED SMALL BOX • LINE VOLTAGE • PASSIVE INFRARED (PIR) • 2 POLE
SPECIFICATIONS
FEATURES
100% Digital PIR Detection,
Excellent RF Immunity
2 Self-Contained Relays,
No Power Packs Needed
No Minimum Load Requirements
Interchangeable Hot & Load Wires,
Impossible to Wire in Reverse
Push-Button Programmable
Adjustable Time Delays / Pole
No Field Calibration or Sensitivity
Adjustments Required
Convenient Test Mode
100 hr Lamp Burn-in Timer
Green LED Indicator
LAMPMAXIMIZER® TECHNOLOGY
• Protects Lamp Life while
Maximizing Energy Savings
• Minimum On Timer (15 min default)
• Occ. Time Delay (10 min defatult)
PHYSICAL SPECS
SIZE (w/ MOUNTING FLANGE)
3.40” H x 3.40” W x 1.40” D
(8.64 cm x 8.64 cm x 3.56 cm)
WEIGHT 6 oz
MOUNTING 2.65” (6.73 cm) square
opening in fixture (minimum depth
1.50” (3.8 cm))
COLOR White
ELECTRICAL SPECS
MAXIMUM LOAD / POLE
(1 Phase Only)
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
MINIMUM LOAD None
MOTOR LOAD 1/4 HP
FREQUENCY 50/60 Hz
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
OVERVIEW
With two self-contained relays, corridors
with A/B switching are ideal for the SBR 10
2P Series occupancy sensor. At 9 ft (2.74
m) this sensor views up to 28 ft (8.53 m)
in all directions. The SBR 10 2P sensor
recess mounts into a 2.65” (6.73 cm)
square opening in a fixture and is perfect
for classrooms, private offices, or large rest
room applications.
SENSOR OPERATION
The sensor detects changes in the infrared
energy given off by occupants as they move
within the field-of-view. When occupancy
is detected, a two self-contained relays
switch the connected lighting loads on.
The sensor is line powered, switches line
voltage, and requires no field calibration or
sensitivity adjustments.
LAMPMAXIMIZER®
This sensor also contains patented
LampMaximizer technology that allows
users to aggressively target energy savings
while still protecting lamp life. A minimum
on timer, factory set atwww.DataSheet.co.kr 15 minutes, helps
preserve lamp life by eliminating all lamp
cycles shorter than lamp warranties specify.
OPTIONS
INHIBIT PHOTOCELL (P)
• Photocell can prevent lights from
turning on if adequate daylight is
available, but cannot turn lights off
• Maintains two set-points, enabling
separate control of both poles
DUAL ZONE PHOTOCELL (DZ)
• Provides more advanced control than
P option
• DUO Operation: Determines
necessary on/off combination of poles
in inboard/outboard applications
• Percentage Offset Operation: Uses
relative set-point for second pole in
dual zone applications
347 VAC (347)
• Allows sensor to be powered from
and switch 347 VAC
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C
• Required for cooler/freezer
applications
A standard occupancy time delay is
also present that ensures lights turn off
(assuming minimum on timer has elapsed)
if no occupancy is detected. This timer
is factory set at 10 minutes to promote
energy savings, but is adjustable between
30 seconds and 20 minutes. These
adjustments are done manually through
the unit’s push-button; no tools required.
CSA LISTED
TITLE 24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY
ORDERING INFO SBR 10 2P [PHOTOCELL] [VOLTAGE] [TEMP/HUMIDITY]
PHOTOCELL
Blank = None
P = Inhibit Photocell
DZ = Dual Zone Photocell
VOLTAGE
Blank = 120/277 VAC
347 = 347 VAC
TEMP/HUMIDITY
Blank = Standard
LT = Low Temp
Datasheet pdf - http://www.DataSheet4U.net/
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SBR102P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SBR102 | Diode ( Rectifier ) |  American Microsemiconductor |
| SBR1020 | (SBR1020 - SBR1060) Schottky Barrier Rectifiers |  DEC |
| SBR10200 | 10.0 Amp Schottky Barrier Rectifiers |  SeCoS |
| SBR10200CT | Super Barrier Rectifier |  Diodes Incorporated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |