DataSheetWiki


EPC2T32 fiches techniques PDF

Altera Corporation - Configuration Devices

Numéro de référence EPC2T32
Description Configuration Devices
Fabricant Altera Corporation 
Logo Altera Corporation 





1 Page

No Preview Available !





EPC2T32 fiche technique
December 2002, ver. 12.2
Configuration Devices for
® SRAM-Based LUT Devices
Data Sheet
Features
Serial device family for configuring APEXTM II, APEX 20K (including
APEX 20K, APEX 20KC, and APEX 20KE), MercuryTM, ACEX® 1K,
and FLEX® (FLEX 6000, FLEX 10KE, and FLEX 10KA) devices
Easy-to-use 4-pin interface to APEX II, APEX 20K, Mercury, ACEX,
and FLEX devices
Low current during configuration and near-zero standby current
5.0-V and 3.3-V operation
Software design support with the Altera® Quartus® II and
MAX+PLUS® II development systems for Windows-based PCs as
well as Sun SPARCstation, and HP 9000 Series 700/800
Programming support with Altera’s Master Programming Unit
(MPU) and programming hardware from Data I/O,
BP Microsystems, and other manufacturers
Available in compact plastic packages (see Figures 1 and 2)
– 8-pin plastic dual in-line package (PDIP)
– 20-pin plastic J-lead chip carrier (PLCC) package
– 32-pin plastic thin quad flat pack (TQFP) package
– 100-pin plastic thin quad flat pack (TQPF) package
www.DataSheet.co.kr
– 88-pin Ultra FineLine BGATM package
EPC2 device has reprogrammable Flash configuration memory
– 5.0-V and 3.3-V in-system programmability (ISP) through the
built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG)
interface
– Built-in JTAG boundary-scan test (BST) circuitry compliant with
IEEE Std. 1149.1
– ISP circuitry is compatible with IEEE Std. 1532 for EPC2
configuration device
– Supports programming through Serial Vector Format Files
(.svf), JamTM Standard Test and Programming Language
(STAPL) Files (.jam), Jam STAPL Byte-Code Files (.jbc), and the
MAX+PLUS II software via the MasterBlasterTM,
ByteBlasterMVTM, or BitBlasterTM download cable
nINIT_CONF pin allows a JTAG instruction to initiate device
configuration
– Can be programmed with Programmer Object Files (.pof) for
EPC1 and EPC1441 devices
– Available in 20-pin PLCC and 32-pin TQFP packages
Altera Corporation
DS-EPROM-12.2
1
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 30
Télécharger [ EPC2T32 ]


Fiche technique recommandé

No Description détaillée Fabricant
EPC2T32 Configuration Devices Altera Corporation
Altera Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche